Hi
I have a error code 23 which is top dead sensor but we're is the sensor ?
Is it in the dizzy if so were is the hall sensor or is it the same thing.
Thanks
Darren:pleasesign::pleasesign::pleasesign:

Yep, it's in the distributor. A metal disc cutting the path of two optical transmitters and receivers, disc has two concentric slots cut in it - one for crank angle and one for cam angle. So error 23 would refer to one of those. Try another distributor from a wreckers, but first check the electrical connector to the distributor, the signals are low voltage and easily confused by corroded connections. If dirty, a good clean and try again for the error code is suggested. Clear it first, disconnect battery for 30 seconds.

EDIT: "Hall sensor" refers to the way the sensors work. Also referred to as Crank and Cam Angle Sensors to say what they do.

Thank you very much Mad Max.
Is there an easy fix for code 14 throttle sensor

Fix one error at a time. lol

Throttle sensor - I'd do what is done on the third gen engines, look up adjustment procedure and resistance values for it, then replace if defective.

Thanks Mad Max I replace the hall sensor and cleaned the throttle sensor all is fixed