Hi
I am trying to sell my Osaka 19" Mags
On the label on inside it says PCD 5-450
Now I know that makes no sense as these came off my 380 and should fit a Magna as well
Is there a conversion I should be using to show the correct PCD ?
I have had a few people enquire but when I tell them the PCD they are as confused as me
Cheeers
Chrisv

If they were from your 380 then they should be 5X114.3 from what I understand.
Are they multifit?

http://i849.photobucket.com/albums/ab54/chrisv/100_3850.jpg (http://s849.photobucket.com/user/chrisv/media/100_3850.jpg.html)no they are not multifit
I have checked each rim and all 4 say PCD 5-450 ??
I know they fit a 380 cos they came off mine

All 2nd gen & 3rd gen Magnas and 380s are PCD 5 x 114.3, so if they fitted on your 380 that's what they are and you and others should ignore any markings that say PDC 5 x 450. Just looking at them (and I must admit they are a great looking rim!) they are not multifit, I have no idea why they say 5 x 450. 450 would be the PCD for the wheel on a giant earthmoving or ore carting machine! The second number (eg 114.3) is the diameter in mm of the circle through the middle of the holes.

Cheers for that
What other makes would they fit as I fear my customer base may be limited to magna and 380

I'm pretty sure that all Ford Foulcans from the BA onwards are also PCD 5 x 114.3.
I fitted a set of Ford rims to my TE Magna.


Edit - it's all Furd Foulcans (and Fartlanes) from the AU onwards, so you have a huge market.

114.3 = 4.5 inches.

you have a pretty large customer base for the wheels really.

Thanks Oggy, that would explain it, I didn't think of Imperial units like inches!
A bit remiss of an old fart like me who grew up with inches, feet & yards.
Would also explain why the weird PCD of 114.3 - it's simply 4.5 inches converted to mm.


Edit #2.


It seems the Magna/380 centre bore is 67.1mm, and the Foulcan centre bore is 70.1 mm.


Which means Foulcan rims will fit on a Magna/380 (with 3mm diameter locating rings), but 380 rims won't fit on a Foulcan, unless they were already 70.1 mm centre bore with locating rings.


Now that I think about it, I seem to recall that the Foulcan rims I fitted to my old TE were a tad loose fitting!

Well I thought of inches if it had read 4.5 or 4.50 but I checked every wheel looking for the decimal point and all 4 read 450....Makes sense now
Cheeers
By the way arnt there some peculiar buyers on ebay....