Hey guys I'm new here. I'm building a tube track/hill climb car
I'm trying to find out some info re wiring.
I have diced the factory ecu and am using a
Wolf 3d v4. I'm trying to find out what wire is what
On the crank angle sensor and maf and tps.
Would really appreciate the help.:)
Also is anyone here running a wolf?
Will post some pics tonight of the project.
Should be fun the whole thing ways only 500kg
Rear engined.. Yeha!!

You would need to get your hands on the schematics for the Wolf and see what inputs are needed, them make up your own wiring to suit - or recycle some of the wiring and plugs off a Magna.

Have done that have sussed on where all wires
Go. My diagram for the magna don't tell
What each wire does. Tells me where they plug into
Factory ecu but not what they do. Eg the schematics
Show me what wires go from crank sensor to the ecu
But not what they do. For example which color is ground
Which is ref and which is 5v input.

I see the problem but can't help.

Anyone else got any bright ideas?

Perhaps someone has a map of the ECU inputs?

Can I get a copy of your info

Are you looking at the Mitsu factory manual? not a Haynes or gregories wannabe?
The factory manual will have all the info you need, you just need to look closely at the wiring diagrams and read the instructions on how to decipher them at the start of the section of the manual.
You can also get a bit more info on what plug is what by looking in the manual on fault diagnosing the components (eg the crank sensor)