PDA

View Full Version : Recent MODS: pomejo's VRX



VRX_MY02
28-10-2004, 07:25 PM
** Posting some pictures for pomejo **

Here are some pictures of a few mods that pomejo has completed recently...

VRX_MY02
28-10-2004, 07:26 PM
And some more pictures......

WhiteDevil
28-10-2004, 07:30 PM
:bowdown:
Can't wait until he shows us on the Spur how his S/C VRX will handle, it's going to be on rails!
:bowdown:

TheDifference
28-10-2004, 07:36 PM
enough of this, show us pics of the SC install already!!!!!

pomejo
28-10-2004, 07:39 PM
IN PIC 1 ITS THE RPW 2POT CAlipers 294mm discs with ebc green stuff pic 2 is koni adjustable shocks with white line lows. pic 3 is a heavy duty sway bar bigger than the stock one pics 4-5 are the rpw short shift kit

pomejo
28-10-2004, 07:42 PM
pics 6-7 a billet steal fly wheel pics8-9 exedy heavy duty semi ceramic clutch

pomejo
28-10-2004, 07:44 PM
sc not finished only got the f w back yesterday it should be done in 10 days

Mr İharisma
28-10-2004, 08:03 PM
The results ( and price ) shall be interesting. Good work dude. :D

EZ Boy
28-10-2004, 08:07 PM
sc not finished only got the f w back yesterday it should be done in 10 days

The longest 10days of your life!! What type of SC are you using? I'm an SC nut, nearly bought a PES SC kit and the Audi A6 to boot - 295hp at like 8psi - just getting warm really!

TZABOY
28-10-2004, 08:13 PM
I'm curious to see this SC kit on the 6G74 because i have never seen it done before. Good luck regardless of outcome

pomejo
28-10-2004, 08:20 PM
its a cappa votex with inter cooler should be 230+kw atw not bad for a start more mods next year still more pics to come from this lot

AussieMagna
29-10-2004, 09:52 AM
pomejo, where did you get your flywheel and clutch from? The clutch looks like an organic clutch not semi ceramic although i could be wrong.

mr_mbquart
29-10-2004, 11:53 AM
wat sorta cost was the sc and installation? cheaper or dearer than a turbo?

pomejo
29-10-2004, 03:37 PM
wat sorta cost was the sc and installation? cheaper or dearer than a turbo?
i paid $8000 for the sc i dont know how much the turbos are and i paid $1500 for the inter cooler fitted it is costom made to fit behind a vrx grill allso comes with fuel pump fuel reg all pipeing and new ecu

pomejo
29-10-2004, 03:41 PM
pomejo, where did you get your flywheel and clutch from? The clutch looks like an organic clutch not semi ceramic although i could be wrong.
fly wheel was costom made the clutch came from on line performance dont have invoice but thats what i asked for its the same as the rpw one

pomejo
29-10-2004, 03:43 PM
pomejo, where did you get your flywheel and clutch from? The clutch looks like an organic clutch not semi ceramic although i could be wrong.
you cant see on the pics but there are yellow line in the plate think thats the ceramic bit

MadMik
29-10-2004, 07:32 PM
nice stuff hey what type of ecu did dave put in???

pomejo
29-10-2004, 07:58 PM
nice stuff hey what type of ecu did dave put in???
i dont know i left up to him he knows better then me

MadMik
29-10-2004, 08:09 PM
i just picked up a GReddy(piggy back) . Dave would have put in a Haltech or similar :bowrofl:

TheDifference
29-10-2004, 08:44 PM
greddy by itself would not be able to handle anything like that.

Altera98
02-11-2004, 05:26 PM
its a cappa votex with inter cooler should be 230+kw atw not bad for a start more mods next year still more pics to come from this lot

c.a.p.a is the company that does most supercharged kits for ford and holdens, Vortech is the brand of the centrifugal supercharger, they about 3000$ retail new.

obviously u r going to be using a pulley to drive a shaft along the rocker cover and mount the s/c over the trans i bet, as its the only possible way to do it i can see.
I was going to do that next year when my other project is finished and i can take my magna off the road for a while...ah well lol

Ralliart Boy
02-11-2004, 05:29 PM
Good luck.

Can you tell me what parts you are using in the SC install, who is doing the job and estimated costs.

Thanks.

pomejo
03-11-2004, 01:11 PM
Good luck.

Can you tell me what parts you are using in the SC install, who is doing the job and estimated costs.

Thanks.
well you have a pod filter and uni chip piggy back and cai so all you will need is a fuel reg and the sc maybe a fuel pump a bit of pipe or two the sc is $3000 new as above i would say it would cost you around $5000-$5500at the mech i use there name is skye service's in cranbourne vic his name is dave

Altera98
03-11-2004, 01:26 PM
I imagine the main expense would be in the custom made brackets and pulleys.

pomejo
04-11-2004, 02:03 PM
I imagine the main expense would be in the custom made brackets and pulleys.
ya and all the pipe work
just picked up new drag wheels
dunlop sp sport 215 17s

brownie
07-11-2004, 12:32 PM
Just picked up new drag wheels
dunlop sp sport 215 17s

Sweet as! Good luck with the S/C kit post pics when you can!

Cheers,
Brownie