PDA

View Full Version : Whiteline Antilift/Castor Kit, Camber Pins


Ralliart 410
29-01-2005, 10:57 AM
I recently had Whiteline Antilift/Castor kit and Camber Pins installed and having a look underneath the car all i can see are two new yellow bushes. Not knowing much about suspension or what the Whiteline kits above consist of i would like to ask does any of these mods stand out to the naked eye and where do i look for them?

I am just a little sus about the suspension place who supplied and fitted these mods and would like to be certain i got what i paid for. Overall it drives very nice but before the wheel alignment was U/S.

Here are some pics i took underneath...
PattyBoy
29-01-2005, 11:01 AM
How much was the Anti lift kit?? and how much install?
Ralliart 410
29-01-2005, 11:04 AM
I had the Camber pins installed first and a 4 Wheel Alignment, then the rest of it a week later so i'll give you totals..

KCA412 - Camber Kit - $79.00
KCA372X - Antilift/Castor Kit - $189.00
4 Wheel Thrust Alignment - $43.00
Labour - $140.00
SARRAS
29-01-2005, 12:22 PM
The charges seem about right as per similar work on mine. The 'Yellow bushes' you see are the AL Camber kit - the castor pin is presumably elsewhere - perhaps you need her on ramps to see that.

I'm a bit surprised ANOTHER wheel alignment wasn't in order after the castor kit though.
Ralliart 410
29-01-2005, 01:38 PM
The charges seem about right as per similar work on mine. The 'Yellow bushes' you see are the AL Camber kit - the castor pin is presumably elsewhere - perhaps you need her on ramps to see that.

I'm a bit surprised ANOTHER wheel alignment wasn't in order after the castor kit though.

I did get another wheel alignment after the castor kit. I just advised my total $$$ spent.
SARRAS
29-01-2005, 03:33 PM
I did get another wheel alignment after the castor kit. I just advised my total $$$ spent.

ahh good - makes sense.
eagleaus
30-01-2005, 08:37 AM
Where those yellow bushes are housed.The bracket that housed should now be sitting on three goldie colored flat wash's about 9-10mm thick.The bolts that come with the kit are silver not the dark color elsewhere on the car.The camber bolt is one of the bolts that hold the shock to the suspension arm.You will see it as its not as big as the other one that's there (two bolts holds the shock to the arm etc.,)