View Full Version : 6x9 that fit : List needed.. 3rd Gen owners
magnat
28-04-2005, 03:38 PM
To try and Help 3rd Gen Magna owners we need a list
Now if we create a list this will help people get the correct 6x9's for thier Car...
Things that should be included is :
Does the Stock stock Grills fit over them
Do the stock holes need the sides Rollied to fit them in
Company make:
Price Paid :
Model Number
Type
So Something like this:
Company : Blaupunkt
Price : $120 on Sale
Model : GTX-690
Type 3-way
Hole Modification : Yes Rolling the Outer rim needed
Stock Grilles : Yes with a bit of effort
Construction : Transperant Polyproplene Cone with Butyl Rubber Surround
michaelhaynes110
28-04-2005, 04:48 PM
Company : Pioneer
Price : $119
Model : TSA6960E
Type: 3-way
Hole Modification : No
Stock Grilles : Yes, Have to get rid of the plastic ridges on the back of grilles
Construction : Dark Blue Interlaced Aramid Fibre Reinforced IMPP Cone
Colgate
28-04-2005, 05:24 PM
Company : Pioneer
Price : $329
Model : TSA6991S
Type: 5-way
Hole Modification : No
Stock Grilles : Yes, Have to get rid of the plastic ridges on the back of grilles
Construction : Blue Interlaced Aramid Fibre Reinforced IMPP Woofer Cone
matt86
28-04-2005, 05:57 PM
Company : Pioneer
Price : $128
Model : TSA6961E
Type: 3-way
Hole Modification : No
Stock Grilles : Yes
Construction : Dark Blue Interlaced Aramid Fibre Reinforced IMPP Cone (i guess)
el3ment
28-04-2005, 06:46 PM
Company : Pioneer
Price : $329
Model : TSA6991S
Type: 5-way
Hole Modification : No
Stock Grilles : Yes, Have to get rid of the plastic ridges on the back of grilles
Construction : Blue Interlaced Aramid Fibre Reinforced IMPP Woofer Cone
How do these sound? Im thinking of getting them also. Do they manke a big enough difference compared to the 3-way? Just curious coz of the price difference.
mrhoggy
28-04-2005, 06:52 PM
Company make: Boston
Price Paid : 399
Model Number NX97
Type 6x9
Colgate
28-04-2005, 07:06 PM
to tell the truth i could'nt really say ... i only have them hooked up to the stocko headunit ... dont get my good headunit in untill a coupla more weeks so they're pretty much just going to waste ... same as the pioneer splits in the front doors ... turn the stocko h/u up to about 25 and they start to distort ... but i put that down to the headunit ... not the speakers
97_verada
29-04-2005, 08:14 AM
to tell the truth i could'nt really say ... i only have them hooked up to the stocko headunit ... dont get my good headunit in untill a coupla more weeks so they're pretty much just going to waste ... same as the pioneer splits in the front doors ... turn the stocko h/u up to about 25 and they start to distort ... but i put that down to the headunit ... not the speakers
They will be worse than you stocko speakers till you get a decent headunit for the simple reason that your stock head unit doesnt have the power to run them. General run is to get an after market headunit first then change the speakers
cheers
jaz
[THUGDOUT]
29-04-2005, 10:36 AM
or amp up ur fornt splits and run ur rears off the new headunit
heathyoung
29-04-2005, 01:26 PM
Does the Stock stock Grills fit over them: YES
Do the stock holes need the sides Rollied to fit them in: NO
Company make: Alpine
Price Paid : $120(2 way)/$179(3 Way)
Model Number: FIICR
Type: 6X9" 3 Way, or 2 way - Rubber surround, polycone. Sounds good.
Cheers
Heath Young
Mr İharisma
29-04-2005, 03:31 PM
I think all sony 6x9's fit with no mods required. Any speaker will sound better running off an external amp, i amped my 6x9's and they sounded fantastic.... until I amped my splits instead and added a sub... then they went straight back to running off the deck.
5 way :nuts: 2 of the ceramic super tweeters play >20KHz, i know heaps of songs that they would be handy :bowrofl: 4 way is overkill but 2 or 3 way will do the job like those nice boston or Hertz 6x9's :D
spud100
03-05-2005, 08:01 AM
Company : Pioneer
Price : $140 ish - Special at Strathfield earlier this year.
Model : TSA6970E
Type: 3-way
Hole Modification : Yes- Bend the lip out all the way around.
Stock Grilles : Yes
Construction : Dark Blue Interlaced Aramid Fibre Reinforced IMPP Cone
Other :- Magnet very close to the boot lid torsion bar on one side. Put a piece of plastic tube over the bar and fixed with hot melt glue.
Powered by vBulletin™ Version 4.0.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.