Any tips on meshing 3rd Gens? Got a my AWD and maybe the TF to do.

the tf grill splits in two by way of screws on the back all u do is cut out two parts of mesh to shape into the hole and place in between the two sections and screw back together

its a mod i still have to do on my car, but still havnt decided on what colour mesh and what kind

the tf grill splits in two by way of screws on the back all u do is cut out two parts of mesh to shape into the hole and place in between the two sections and screw back together

its a mod i still have to do on my car, but still havnt decided on what colour mesh and what kind

You sure it's not the TH grill that splits?

Yes, the tf grill does split. the black slightly diagonal bits detach from the front silver bit. i assume he means to just cut out 2 bits of mesh and stick them in the gaps.

Yes, the tf grill does split. the black slightly diagonal bits detach from the front silver bit. i assume he means to just cut out 2 bits of mesh and stick them in the gaps.

Well in that case, might have to do a little bit of tinkering :P

what about the two tabs in the bottom left and right hand corner of the grill parts. won't that be in the way of the mesh? or can u just cover it

Well to honest havnt actually taken grill off yet so not sure about the tabs.
But i know they split apart and been told you just cut the mesh to fit in the holes and put it all back together. Ill take grill off tomorrow and have a look, let u know what i find