today i just installed a 22mm adjustable rear sway and a rear camber kit...both whiteline.
the car is sitting 90mm lower so i put both shims in adding..or taking away 1.3deg of camber. also set the swaybar at its hardest.

ok..took the car for a test drive and now the cars steering feels VERY sloppy , the car feels solid going hard around tight corners ...BUT..when siting on the highway at 100 or so and swerve from side to side im sure the car doesnt feel as solid on the road as it did before:confused:

so what does everyone think the problem is: rack and pinion worn?
taken away to much of the camber?
swaybar set to hard?
other?
:confused: :confused: :confused: .....???
HELP!!!

your rear bar is simply set to hard...be carefull unless u are the oversteer master as with your bar on the siffest setting, high speed stability is significantly comprosmised ALSO lift off oversteer is probably excessive...
get under your car and adjust the bar yourself (it's easy) and play around with the different settings until you find what you like...as I have the same bar on my car for 4 years the stiffest setting would only be usefull around a tight track like wakefield or for using when the bar softens up over time...