i have just brougth a new system and im not to shaw how to set it i have gone fusion,i got 2 fusion 300d amps
CEA 2006 OUTPUT POWER @ 14.4VDC
200 Watts RMS per channel @ 4 Ohms and 1%THD+N
S/N > 65 dBA (reference 1 watt into 4 Ohms) LINKED POWER OUTPUT SPECIFICATIONS
800 WRMS x 1 into 4 Ohms
1000 WRMS x 1 into 2 Ohms

2x PowerPlant fpw 1200
Magnet Structure: 200 Oz
Power Handling (MAX): 900 Watts
Voice Coil: 2.5" Black Alloy DVC
Impedance: 4 Ohms
Free Space Response (Fs): 28.5 Hz
Efficiency (1W/1M): 94.5dB
Frequency Response: 22Hz-1.2kHz

thats the subs bit i would like to know what would be the best way to set them ,frount loaded or rear loaded i drive a manga sports 2003

in the car i have 2x FES-692
40 Oz Magnet / 80 Oz Magnet Structure
1.25” High Temperature Kapton Voice Coil
1” Swivel Silk Dome Tweeter
Power Handling: 260 Watts
Frequency Response: 55Hz – 22kHz
Efficiency (1W/1M): 94dB
and 2x FES-652
25 Oz Magnet / 50 Oz Magnet Structure
1” High Temperature Kapton Voice Coil
1” Swivel Silk Dome Tweeter
Power Handling: 180 Watts MAX
Frequency Response: 65Hz – 22kHz
Efficiency (1W/1M): 92dB
with 1xFP-1404
CEA 2006 OUTPUT POWER @ 14.4VDC
130 Watts RMS per channel @ 4 Ohms and 1%THD+N
S/N > 80 dBA (reference 1 watt into 4 Ohms) running my frount speakeres

will this sound not to bad if any know these specks and brand?
thank you

Rear load the Subs !!!
Cabin gain is a major advantage..
Will give your subs the appearance of being louder..


I think you will be pleased going with Fusion.. Piccies of the install would be great...