My next Question is has anyone fitted one piece parras to a TH...???

Can the spammers go elsewhere for a bit please.. serious questions here..??


Has anyone fitted please..?? Have trouble getting the ONE PIECE parras in.

Cheers
Jason :D

http://www.aussiemagna.com/forums/showthread.php?t=22668&highlight=parabolics

there ya gho mate

i know how to fit them...
are you using HB3 and HB4 bulbs??? or are they H1 and H7's??


also are they off a verada??

I meant physically putting them into the spots.. They dont seem to line up properly in the corner and they sit out in the middle next to the grill.. the plugs are lining up but it doesnt seem right... any ideas?

maybe you forgot to take out the blinker "metal bracket"????
stuck on there by 2 bolts

I meant physically putting them into the spots.. They dont seem to line up properly in the corner and they sit out in the middle next to the grill.. the plugs are lining up but it doesnt seem right... any ideas?

Oh.... thats what you mean..... yeah I found them to be a pain in the @ss to get in. Definetly a hell of alot easier if you remove the front bar (or at least unbolt it and slide it out slightly). Take it from someone who scratched his both sides before deciding to take it off!!

maybe you forgot to take out the blinker "metal bracket"????
stuck on there by 2 bolts

nah thats out..

but yeh.. theyre a b1tch..

we got one side it but it just doesnt fit flush.. the other side wont even go in..

whats the trick with getting the front bar off?

nah thats out..

but yeh.. theyre a b1tch..

we got one side it but it just doesnt fit flush.. the other side wont even go in..

whats the trick with getting the front bar off?

Jack up car

Remove "Centre splash guard" (plastic attached to underside of bumper (bolts and scrivits)

carefully peel back the front of the 'splash guards' in the front wheel archs to reveal some bolts - undo bolts

remove grill (probably have already) and remove bolt from support bracket behind grill

from underneath car you should be able to see 2 bolts on on either side of the 'radiator cross member' - these are very long.

check for any more bolts or brackets around the headlight and top of radiator - but that should be it.

carefully pull the entire front bar forward. If it isn't comming - there's more bolts somewhere.

found the problem.. bumper is a mess.. its all bent and sitting right back..

Cheers all. :D

found the problem.. bumper is a mess.. its all bent and sitting right back..

Cheers all. :D
women drivers maybe??? :bowrofl:

women drivers maybe??? :bowrofl:
How many front bars have you wrecked now? :P

How many front bars have you wrecked now? :P
rofl....

add me to that list....

FBx1

women drivers maybe???

How many front bars have you wrecked now?


:bowrofl: :bowrofl:

Thanks for the support Fuzzlet.. cos most people know all ive ever done is scraped underneath the front bar getting out of this ****ing carpark in north sydney. I have never parked there since. (I even went out full wog style).

*Removed by Moderator*

But yeh.. apart from the incomplete wiring fix.. its all good :) lines up with the grill perfectly, and didnt even have to take off the bar. Just jammed em in fine.. well i watched while ego jammed.. (I wouldnt trust myself.. Id break something)

Looks nice :D

So yeh, in conclusion. They fit.

How many front bars have you wrecked now? :P
it was **** when i bought it smartie-and the new one is fine

*Removed By Moderator*

Both of you leave it there thanks... not one more peep, thanks. grrr! :rant:

Move on now folks.. nothing to see here ;)

:bowrofl: :bowrofl:

Thanks for the support Fuzzlet.. cos most people know all ive ever done is scraped underneath the front bar getting out of this ****ing carpark in north sydney. I have never parked there since. (I even went out full wog style).

I managed to put a nice scrape in my front bar coz of front shocks bottoming out around a corner...(yes, standard ride height too...)

it was **** when i bought it smartie-and the new one is fine
Ah okay then, didnt know that bit

OK. I'm spamming this section.

I did my front bumper on an embankment, and the replacement on a rabbit.