I need a wiring diagram for a TE Magna 1997

PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

you should find it in the workshop manual!, may want to pop out and pick up a copy!, i have found mine most helpful, (until i lost it)

fortunatly i read it cover to cover,

"Cut the red Wire"

J/k :D

Where can I get it from??

you can get a gregory's from your local automart type shop... cost about $15
(i'll still send that cd)

I rang Penrith Mitsubishi 30mins ago he said they don't make them. So Gregorys do make them then? ****ing dickheads.

I have a TH workshop manual which should give you a good idea, what do you need a diagram of in particular.

I rang Penrith Mitsubishi 30mins ago he said they don't make them. So Gregorys do make them then? F***king dickheads.
might not be gregory's... maybe some other brand, Haynes maybe... but they are made... and no, mitsu wont let you have them or sell them, i badgered my local mitsu for ages trying to get one!!!

What are you trying to wire - what wires do you need to know and what specific wiriing diagram??

Mate - we need more info to help you out?? What are you trying to do??

Manual

I'm installing my new alarm. I'm having trouble with the remote start. If you guys wanna know what alarm it is, its a MannixUSA there on Ebay. Works very well so far but just the remote start doesn't work.(human error)

So what wires are you trying to get your hands on??

If gamisou was here he should help - he installed a start button like on the S2000 and I assume that he used the same wires!!

But which wires were you after??

I can email a few pages which have the appropriate details on them if you like??

Manual

In the book it says to use either the tacho or the alternator. I used the alternator and its not working. So I emailed thje company and they said the obvious and now I need to know the wire for the tacho

When I was wiring in my RSM - I couldn't find the right wire under the dash - so I slaved my wire straight into the crank angle sensor under the hood on teh belt side of the engine (for the TH it was the drivers side.)

There is a little sensor at the top of the engine that has 3 (??) wires coming out of it - the top wire is the right wire to use - this is a blue wire with a red stripe - this should be effiective - if you can find it coming out of the rear of the instrument cluster use that one - but I just ran a length of wire through the firewall and to the sensor there - was easier.

Also - what email do you want me to send the page to??

Manual

Steven.Dracopoulos@team.telstra.com

Thanks

ok - I have just emailed it to you - you should be able to figure it out fairly easily!!

Any more queries let us know and I am sure we can help!!

Manual

did you get it working ?

i saw those alarms on ebay they look very kewl . great choice how much did it cost you with conversion etc ?

Yeah they are great so far but the problem is the remote start. I hooked it up wrong but in the book it says you can use the tacho or the alternator.

I still learning how to use it but all the features on it are great like the anti-carjacking where you can disable the engine in the car whilst the thieve/s are driving.

I still learning how to use it but all the features on it are great like the anti-carjacking where you can disable the engine in the car whilst the thieve/s are driving.

Oooh - yeah - you wouldn't wanna be doing that though - instant lock up of gearbox and enginge wouldn't be good - though you could beat the F*@$ outa the guys who knocked off you car i spose!!

Manual

Steering lockup, accelerator jamming, and door deadlocking might be preferable :)

Who gives a shit about thieves anyway...........I don't

Who gives a shit about thieves anyway...........I don't

In that case the alarm is for???

Manual

Well next cruise that's coming up I will show you guys everything it can do. Or if you guys want to ask me anything else about it feel free