Hi again would anyone know how to get the hub bushes out from the back wheels do they have to be press off and on or can they be done at home with a hammer.

would be happy with any help.

Is there another name for what I am asking about no-one seems to know what a hub bush is I know that there are 2 bars going to your tyre one is the sway bar the other one is what I am asking about. Is there another name for it.

I have found out the name of the part its attach to the lower control arm at the back wheel would anyone know how to remove it

The control arms belong to the front wheels, you won't find them on the back end. I think what you mean is a panhard bar, and with regards to bearings and bushes, they usually have to be pressed in and out, but you may be able to do it on your own.

The control arms belong to the front wheels, you won't find them on the back end. I think what you mean is a panhard bar, and with regards to bearings and bushes, they usually have to be pressed in and out, but you may be able to do it on your own.
on a third gen as they have irs they do have control arms on there setup.

I'm not 100% sure, but usually they can be knocked out with a suitable sized drift and hammer, but its not as easy as it sounds, otherwize they may need to be pressed out