ey guys i did a search for wiring up parras but mine arnt working right. on low beam my full beams are on aswell (but not on full power) so my low beam goes dull. so i have the low and high beam on and its ver dull and when i flick the switch to full beam the full beam works good but the low beams turn of. so can neone help me with this prob. also do i use the same wiring loom or get the verada loom.

thanks guys
Ash

:bump: :bump:

you got to rewire first and get the low berams working then check out this tread the staple it works got a spare switch you can borrow if you dont trust me.

http://www.aussiemagna.com/forums/showthread.php?t=24203

thanks for that. but i want to know how to use the para globe (if u know wat i mean) this is wat i did. i installed the parras but the globes are different. the verada globes have 2pins and the normal globes have 3. but u cant stick the normal globe in a parra coz of the size. so i played round with the wireing but sum how the full beams are on when the low beams are on. and its really dull on low beam. and when full beam cums its ll good but the lows go off but atm thats not bothering me. i jus wanna get the low beams to start workin correctly first.

and also where is the switch located.

you need to move one of your wires on each side to a differant pin.. you only need two of the three wires in your harness..

and which one will that be??? theres a red, red and white and white and blu i think. the red is powere and the other 2 are ground so which one do i need and dun need.

I did red/blue and red/white on one side and red/white and white/red on the other and left the all red ones off.

thanks. will do it 2moro. also whers the switch where u put the staple.

also whers the switch where u put the staple.

WTF..??? What does that do..??

Please dont tell me its holding your car together.. :confused:

WTF..??? What does that do..??

Please dont tell me its holding your car together.. :confused:

check out the thread!!!! the pics there locks the low beem to the high beem

http://www.aussiemagna.com/forums/showthread.php?t=24203

Check out this link for heaps of info. http://www.wermspowke.net/wiki/index.php/Lights#What_are_parabolics_and_where_can_I_get_the m.3F

This link is the wiring instructions. http://home.iprimus.com.au/pjmorris/Parabolics/parabolic_headlights_differ_from.htm

Cheers

thanks phil. thats looks much better. and no ego my car is not fallin apart.

but i still can think why the lights are so dull.

k jus had a look at my wiring and is the same as the pic. so can sum one in Vic do them for me pliz. after christmas though.

:bump:

found out why everyone tinks im crazy with the staple its cause the way its wired. if your connected like this you need the stample to hold both relays.but if you ground the red then you dont.