Just installing some Verada c pillar lights into my TF Advance. I was wondering how the Verada lights are wired up.

Is it -> Button off and open door = lights on

Is there anyway to override the open door = lights on?

Eg if you switch the main interior light to OFF instead of DOORS does this turn off the c pillar lights as well? Or are they unnaffected? If this does turn them off can anyone tell me how they are wired up b/w the main interior light and the rear c pillar lights

A schematic would come in handy if anyone can be stuffed

Im just going to splice into the wire coming up the a pillar otherwise. This has two wires which I assume are 12v battery and 12v Door trigger. These run into the interior light. But if I run these straight into the them before the main interior light switch I wont be able to turn the rear lights off if the doors are open.

The Verada pillar lights have 3 wires which I assume are ground, 12v batt and 12v Door trigger.


Any help appreciated...

Peace

Tim

from the manual.. :cool:

from the manual.. :cool:
Thankyou sir! :)