Hi all.

I have a TH, with currently no indicators working :rant: . The hazzard lights work, all globes work, but the turn signals don't. It keeps blowing the turn signal fuses, even with i put a higher amp one in there.

Anyone have any ideas

If a fuse blows, your not suppose to put a bigger fuse in it.

The fuse is there because the circuit is drawing too much current.
The fuse is a warning that something going wrong.

So if you put a bigger fuse in there, you could start a fire.

Something is shorting out somewhere along the circuit.

:stoopid: and before the fire all the casing on your wires could melt causing you all sorts off problems so even "if" it doesnt start a fire you can still do alot off damage.:shock:

Go to all 4 corners and unplug the indicaters. If it blows the fuse again like that the problem is probably in the interrupter relay (the little tinka tinka tinka box :D ) or you have a shorted wire.

If it doesnt blow the fuse reconnect the light one at a time to see if 1 of them blows the fuse. If it does then you probably have water, rust or a short in the light that blew the fuse.:D

dude fuses only blow when you have a short.. that there job..:nuts: