The head light bulbs they are 55w right? are thye liek H1 or H3? and how do yutake the front of the lights off on a TR

CHeers
-MB

yea they are 55W
no idea what kind though

you want to take the front glass lens off ur headlight?
ive tried doing it on my spare set of headlights. Doesnt look possible unless you break the lens and buy a new one and stick it in.

The head light bulbs they are 55w right? are thye liek H1 or H3? and how do yutake the front of the lights off on a TR

CHeers
-MB

Yours would be the 55/60 watt dual filament bulbs which is the H1 for the
main beam and a 55 watt H3 bulb for the high beam.

errr actually it's H4 for the low beam, and H1 for the high beam, and yes they're 55watts

correct me if i'm wrong, but imo that's correct..... :lol:

you're talking about TR right?

the High Beam is H1,
Driving Beam is H4, 55W/60W

if you have the frosted lens, it may look dimmer compared to what it should be.

But the Verada Parabolics work really well. i'm trying to save up money for pair of them myself.

cheers

To remove the lights, First remove the grille, the clips if you have a look have a little tab you can move to release them.
The indicators should have metal clips if you look down from on top then move the clip back and they pull out forward...there are 4 botls and the wiring, they should come out

is that the same procedure for the TH? so there are some clips that we should remove to get the bulb out? in my car i can see there is like a rubber sock in which the bulb + socket is stuck very deep into. it's easy to adjust the position of the bulb but how do you get the whole bulb+socket out? and the parker bulbs too?

Nah, with the TE- you unscrew the back of the assembly and unclip a retainer and the bulb will almost fall out.

http://www.users.on.net/fysh/manual/MVC-001F.JPG
http://www.users.on.net/fysh/manual/MVC-002F.JPG

need more piccies of what to do just yell :P

how do you disconnect the wiring? pull out or unscrew? the wires lead to the back of the connector that the 2 pins (of the bulb) go into right? it's this wiring-connector thing that i find hard to dislodge...

how do you disconnect the wiring? pull out or unscrew?

im guessing it must be so simple if you cant figure it out you shouldnt be doing it :P because the book doesnt say :lol:

i haven't really played with it yet. i'll do it when i get my new bulbs... but i should ask the guys who've done it before so i don't break anything. i'm prone to breaking things cos i've got Hulk hands :lol:

They just unplug from the back of the globe ;)