hey guys, i was just wondering if you could give me a b it of assistance in removbing the glovebox lid in my '98 verada.

thanks in advance guys and sorry if its too simple - i did search first

See attached pic - remove piece marked (12) by removing 3 plastic 'Xmas Tree' plugs - two on the front edge, one at the back. Use a pair of knives to remove these. This reveals two screws on the lower edge of the glovebox lid (13) - remove.

Open glovebox to access the frame (14), removing two bolts (M) and four screws (G). Gently release frame and lid together from the dash - noting that in many cases there are wire harnesses attached to the top of the frame. ESPECIALLY IF YOU HAVE A YELLOW HARNESS, pop out the little plastic frame holding the harness to the glovebox frame - do this instead of breaking the harness connectors. The yellow harness is for the airbag - best not to break the circuit.

Once frame and lid together are clear of the car, you can see how the two parts are assembled and screwed together. Reverse proceedure to refit - paying attention to the harnesses mentioned above.

thanks heaps mate, that came in really handy