I have a Magna TH Advance

My Remote for my central locking went flat (I thought) I have since replaced the battery but it does not work, do these need to be reprogrammed after they go flat or is it just stuffed ?

Thanks all, also anyone got a 2nd hand exhaust for a TH Magna sedan.

Cheers

Mark

to my knowledge the remotes need to be reprogram. im pretty ure the instructions on how to reprogram the remotes are in the the owners manual. if this doesnt work try goin to the mitsu dealers

It cost me $50 for a new one from Mitsu...they programmed it in 5 seconds.....so maybe just take your old one there and see if someone in the workshop can help you....

This is how you do it on a TJ, give it a go:

Turn ignition from ACC to ON 3 time within 5 secs, leave at the ON position (hazards should flash to confirm). Then press any button on remote within 5 seconds (hazards flash again to confirm). You can do this for up to 4 remotes. Each remote must be done within 5 seconds of the last.

Dan.

cheers guys I will try this tonight

This is how you do it on a TJ, give it a go:

Turn ignition from ACC to ON 3 time within 5 secs, leave at the ON position (hazards should flash to confirm). Then press any button on remote within 5 seconds (hazards flash again to confirm). You can do this for up to 4 remotes. Each remote must be done within 5 seconds of the last.

Dan.

Does that include remotes from other mitsubishi (ie 2nd hand remotes) or do you need to buy a new blank one from mitsu?

as long as the remote is the same, u can program it to any car, just do all the remotes u have at the same time! second hand is ok.. with most of the green/red button remotes, the solder points break on the barrery carrier before the battery actually goes flat! but 50 or so bucks every 3 yrs isnt much to pay i reckon.