PDA

View Full Version : 6x9 in to te magna



ARCTIC TE
01-12-2003, 07:16 PM
ok guys can any one tell me would a pair off 300 watt 6x9 pionners fit in the parcel shelf of te magna with out any mods

LiquidHotMagna
01-12-2003, 07:47 PM
yup should do! has 6x9's standard

fysh
01-12-2003, 07:55 PM
yup should do! has 6x9's standard

what about ride height ?

LiquidHotMagna
01-12-2003, 07:58 PM
Yup should do...my 7x10s only just didnt fit under the standard grill because they have a sapacer and a big chunk of plastic holding the tweeter up over the cone...damn stupid speakers

I would think you should be right with the pioneers.

Bain
02-12-2003, 06:23 AM
Ahh, if you are going to buy them, make sure the coil isnt too big.

I bought a pair of Cadence 6x9's.. The coil/magnet was to big and hit the little bar that connects to your boot lid.

I then bought some Kicker and had the same problem. SO i made some spacers and raised the speakers 5mm and they fit in cosily.

Now i cant decide on Kicker splits or cadence splits...

heathyoung
02-12-2003, 09:03 AM
I bought Alpine 3 way 6X9's sound very nice, quite high sensitivity and fit perfectly under the stock grills, using the stock mounting holes and screws - sweet :)

Worthwhile upgrade, and not too expensive.

Cheers
Heath Young

Manual
02-12-2003, 01:18 PM
6x9's should fit no issue - i have Boston Accoustic 6x9's and they just touch that bar as mentioned above

no issues at all

Manual

MAGWGN
02-12-2003, 03:51 PM
i think maybe you should have read the sticky at the top of this forum before you asked this question.

Tiphareth
02-12-2003, 04:59 PM
yeh they fit shmck. but i also have the problem of the magnet touching my torsion bar. can anyone tell me if this is a problem? will it screw up my speakers?

Trav

ARCTIC TE
02-12-2003, 06:17 PM
this is what i was unsure abotu did not want to hit the bar under neath the parcel shelf so would u guys recommend me modifing it ?

Bain
02-12-2003, 08:55 PM
6x9's should fit no issue - i have Boston Accoustic 6x9's and they just touch that bar as mentioned above

no issues at all

Manual

The bars in the older molder magna's had a bend to fix that issue.. No such thing exists though for the TJ.