OK basically i got a KJ GTVi Verada. This morning i checked the engine mounts and 1 of them has rubber chunks sheered off of it. It looks completely destroyed. How much is a normal OEM engine mount to get fitted and supplied

they will only sell u the whole thing about $300
get one from megatron, check the qld section, $110 delivered will outlast a standard one

they will only sell u the whole thing about $300
get one from megatron, check the qld section, $110 delivered will outlast a standard one

How much approx for labour

How much approx for labour
i did mine myself for free
mayb $5o from a mechanic

OK basically i got a KJ GTVi Verada. This morning i checked the engine mounts and 1 of them has rubber chunks sheered off of it. It looks completely destroyed. How much is a normal OEM engine mount to get fitted and supplied

i am assuming you mean the driver side one near the washer bottle. that seems to be the most common one. i had that replaced like 2 months ago, cost me 180 for the mount from mitsu and a slab of VB for the install (thanks to my mechanic)

I paid $220 installed (Mitsubishi Genuine)

I paid $220 installed (Mitsubishi Genuine)

ok.. This was for a 3.5ltr... yes its drivers side btw.

ok.. This was for a 3.5ltr... yes its drivers side btw.

yer so i ended up paying 210.

and yer i have a 3.5 and it was the drivers side one

$110 from Megatron, get the middle spec'd one, easy to install yerself, all you need is a jack, piece of wood, hacksaw and a ratchet. Or, one hour labour at a mechanic ($65 or so)

Get a genuine one, these after market ones are not up to any standard.

Not sure why you need a hack saw, hmmm that is scary :confused:

I can fit it for 40 bucks for you.

Genuine ones are total crap. Liquid filled rubbish. They won't last stuff all in a car driven hard at all.

Edit: You need the hacksaw to cut the rubber junk out and also to cut the aluminium ring out from the middle of the mount.