Any got ideas on wat this will set me bak $$$$ wise??

Car is a 95 TS

New Engine Mounts for a 6G72 TS
New Front Shockers
Get The Valve Stem Seals Replaced
Both Rocker Cover Gaskets
Air Con Belt & Pulley

It wont be cheap, you're looking at $100+ for each engine mount just in parts, stem seals on a v6 will be around $300 at the cheapest price.

It wont be cheap, you're looking at $100+ for each engine mount just in parts, stem seals on a v6 will be around $300 at the cheapest price.

i kno the valve stem seals are super cheap to replace just the labour costs thats astronomical

i kno the valve stem seals are super cheap to replace just the labour costs thats astronomical
yeh that's with labour, my mech said about $300 but i think that's mates rates for me.

better off doing the heads like i am.
Stem seals will be yeah about $300 to replace, as said engine mounts are $100 each, front shocks about $100 each too, rocker cover gaskets about $20, and the air con belt and pulley should be about $60 or so.
thats almost $800 just in Parts, PLUS LABOUR.

For about $400 you can get re-coed heads with new seals and guides, the rocker cover gaskets take like 30 mins to put in not even, shocks are a good few hours, easy to do, only a few bolts, but a tedious task, and you will need a vice and spring compressor, thats about $200 saved in labour already.

Doing the heads you need some mechanical know how, or in my case, friends who have mechanical know how:P

and when you do the heads one of the mounts have to come out anyway so you can replace em all while your at it.

I reckon for that list there your going to be looking at easy $600+ just in labour.

Consider doing some of the easier things yourself mate

First of all

Take it too a private mechanic, not mitsubishi if you want too save a few hundred $$$


your looking at over a grand easily

Give me a call mate, I have the stem seals here and can look after you on price for both parts and labour. There are plenty of SA and Vic members I have done these for and I am sure all will attest to the quality of my workmanship.

PM me for my number if you are interested.

Mal

Give me a call mate, I have the stem seals here and can look after you on price for both parts and labour. There are plenty of SA and Vic members I have done these for and I am sure all will attest to the quality of my workmanship.

PM me for my number if you are interested.

Mal

ok mate thanks for that, i still don't kno if it worth the money to fix it tho.
Its a gd car but was involved in an accident b4 i bought it so the front end is a bit Dodgy plus its got 242,000 Clicks on it

ok mate thanks for that, i still don't kno if it worth the money to fix it tho.
Its a gd car but was involved in an accident b4 i bought it so the front end is a bit Dodgy plus its got 242,000 Clicks on it

In that case, if you are thinking of selling it let me know :)

In that case, if you are thinking of selling it let me know :)

LOL ok then and u would want to buy my car bcos??

If it is not in the best cond, needs work I am looking for a cheap run around and do miss the Verada in some ways :) As it costs me virtually nothing to do mech or body it may be worth my while when it is not worth your $$