Ok so Im thinking clear indicators on my 94 TS SE Sedan do 380's fit these?

The side repeater indicators you mean? Then yes they do, straight unclip, unplug, plug in and clip in procedure. 2 Minute job :)

Only costs ~$25 from Mitsu spares aswell :)

The side repeater indicators you mean? Then yes they do, straight unclip, unplug, plug in and clip in procedure. 2 Minute job :)

Only costs ~$25 from Mitsu spares aswell :)
:stoopid:
What he said, identical mould and everything :).
And the crazy part? For the EXACT same indicators, only for a pajero, they're nearly $50 for the pair :nuts: .

:stoopid:
What he said, identical mould and everything :).
And the crazy part? For the EXACT same indicators, only for a pajero, they're nearly $50 for the pair :nuts: .

:nuts: No wonder I very rarely buy spares from Mitsu, say the wrong model and the price is doubled.

Ive got VT repeaters. Cost $45 from Holden...didnt know bout the cheaper 380 ones! :rant:

Ive got VT repeaters. Cost $45 from Holden...didnt know bout the cheaper 380 ones! :rant:
Don't feel bad, they didn't exist until 2005, most people got the vt ones before the 380 came out as they were the best fit.

They are about 12 each here in Newcastle and are only about 9ish in syd i have been told not sure what mitsu in act would be charging? part number is - MN169192 if that helps you out at all? They look alot better than orange. unless you have the orange para blinkers.

thanks guys i was going to do the front indicators also it will be my first mod to the car i might debadge it 2 im poor so i do little mods to start me off

hey i remeber seeing a debadge how 2 on here somewhere anyone know where it went? my wife wont let me go nuts without knowing how lol (im already nuts just not on the car)

hey i remeber seeing a debadge how 2 on here somewhere anyone know where it went? my wife wont let me go nuts without knowing how lol (im already nuts just not on the car)

Warm up the badge with a hairdryer
Then use fishing wire to cut through the now softened goo
Once the bagde is off, layer on Polyglaze Bug and tar remover, let it sit, then wipe off with some gentle scrubbing
Do this about 3+ times until the goo is off


If paint is a slightly different color underneath, Use a cutting compund to make the paint blend in to the old one.

Be patient...Mine took 2 hours lol

i just went and bought the 380 clear indicators after reading this. $10.45 each