all windows go down no problems and the motors work fine, but i'm having problems with the electric windows going up.

they'll only raise a few cm at a time, so you have to lift the window switch then release, then lift, then release etc until it gets all the way to the top. it doesnt matter whether you use the specific door switch or the master control panel on the drivers door, same thing happens.

only the drivers door works properly, though it has had this problem 2 or 3 times.

anyone else had this problem or any recommendations?

best thing to do is pull the door trim off and have a look if anything looks out of place,,

sounds like a regulator issue to me.

Try spraying the runners with CRC Silicone spray.

Rob

The glass may have come off its rails or the regulator may have its steel wire tangled.