Guys i have the 3 button tf remote one with the boot button does anyone know how to program it im not going to spend $45 to get it done could someone please help me out

Hi, Welcome to the Club, I hope you enjoy your stay here.

PROGRAMMING RF TRANSMITTERS Please note: This is for the 3 button type.
Have all transmitters that are to be programmed together in the
vehicle.
NOTE: Once teach mode has been entered all previous codes
will be erased.
1. To invoke teaching mode for the RF transmitters, turn the
ignition between ACC and IGN 3 times within 5 seconds
and leave at the IGN position.
2. The hazard lamps will flash once if entry is successful.
3. Within 5 seconds of this acknowledgment, press any
button on the first remote key.
4. The hazard lamps will flash once to indicate acceptance.
5. Within 5 seconds press any button on the next key to be
taught, this process may be repeated for up to 4 keys.
6. Teaching mode will be terminated by any of the following
events.
1. The ignition is turned off.
2. More than 5 seconds have elapsed since the last
valid key code.
3. Four keys have been taught to the BEM.
4. No correct data has been received in 10 seconds.

Thanks, you saved me $80 today :)

That is so useful mate, thanks!

Worked for my TJ, thanks heaps

This process is also contained in the Owner's Manual.