Im thinking of getting twin exhaust on my TH magna, i was just wondering if anyone else hase done this with a Third gen, i have seen some with it done.

My mate tells me that the fuel tank is in the way for another exhaust, and roughly how much will it cost, for the new piping coming out of the same cat, i already know its going to cost me about $250 for the same exhaust i have already.

Thaks :redface:

i got mine done a little while ago. i had a hole in my exhaust so i figured it was a sign to get the twins. I got from the cat back replaced with a second pipe added on just behind the spare wheel. It cost me 700 and then it the tips were extra depending on which ones i picked. I think it cost a little bit more than it should have but when i got it done i really didn't care.
http://i93.photobucket.com/albums/l73/vvverada/Image036.jpg

sticky at the top of TECH TORQUE

http://www.aussiemagna.com/forums/showthread.php?t=17084

if your car is auto don't bother, the drone will drive u insane...
manual is ok as u can alter the revs in the gears and filter the drone out :cool:

I had it on my auto rada and and now on my manny vrx

PM el3ment he's got twin dualies on his TH...

PM el3ment he's got twin dualies on his TH...

And there insainly loud inside in his auto.

Thats nice dear...

or you could PM el3ment and ask him what HIS experiences are with them?? All depends on what result your looking for- maybe this guy wants noise??

Just my two cents worth- now I remember why i stopped posting in this section, get shot down for offering an opinion...

Thats nice dear...

or you could PM el3ment and ask him what HIS experiences are with them?? All depends on what result your looking for- maybe this guy wants noise??

Just my two cents worth- now I remember why i stopped posting in this section, get shot down for offering an opinion...


I wasnt shooting you down, sorry that u took me that way, just my experience in his car and thats what he says to.

I've got twin exhausts on my 4sp tippy TJ. it does drone a bit, but I always drive in tippy mode, so when it gets loud I just drop back a gear. or you could just put two resonators on.

anyway, here's a link to the thread with pics http://aussiemagna.com/forums/showthread.php?t=39152

cheers,
.wook

got dualies in mine and it does drone a bit but not as much as when i had a single zorst. it all depands on how big your zorst is and what mufflers u got.

i got 2.5" from the cat with a hot do and then it splits just after the rear wheels into two 2" pipes straight into 2 SRT mufflers and ye i like it

Bumper remould cost about $350 including the respray. Exhaust cost about $800. No drone drone whatsoever, the drone on the single exhaust on my TJ was a lot worse. For those who complain of drone, maybe you should look at what you are buying and not think that bigger is always better.

Thank for all ur replys i was going to stick with the 2 1/4 inch piping to keep the noise down a bit, the only reason i want to do this is for the looks and so i can pull up to my mate in his fully sick VN calis with his cannon and 2.5 inch and finally shut him up about how good his car sounds over mine.

Any way i already have a cannon on one side, its a twin so i was going to put one more on the other side so i have 4 Exhaust, it will look mad.:bowrofl:

but i dont want to spend a fortune on this because i have a majour service coming up on my transmission and on my breaks in about 8500 km.

I have the original piping and just after the last flange (just near the spare wheel) it splits down to 2 x 2 1/4" pipes and have 2 Magna Flow Mufflers on there. It does drone abit but you get that

Yeah i did mine a few years ago.. Lov it.. will never go back..

Wasnt hard.. hardest part was getting the 3" pipe over rear crossmember..
Plenty room around the tank..

The hardest part was getting the standard look..

Grr those tail lights are so gay and those pics are so old, my new ones are better. ill need to get undated pics..

As you can see in last two crap pics.. tank aint the issue as it sits forward.. not like commodores at the rear..
http://www.mysti.org/albums/4MYEGO/DSC02706.jpg

http://www.mysti.org/albums/4MYEGO/ESC02697.jpg

http://www.mysti.org/albums/4MYEGO/DSC02619.jpg

http://www.mysti.org/albums/EGOPICS/3inch3.jpg

http://www.mysti.org/albums/EGOPICS/3inch2.jpg

Man i love ur license plate 4MYEGO :bowrofl: and i love what u have done with the twin exhaust with the VR-X rear skirt, that’s what i would love to do when i get the money for a VR-X body kit, but with the exhaust i have on it now.

And now a tec question how do u put pics on the site like u have done, if I know how to do that I will show u what exhaust I have on mine

my girlfriend has a twin on her tj.3" with twin cannon out the back with a VRX bar .looks sweet as but after half hour driving u hava headach.:rant: its an auto:rant: does sound nice when ur up it.but other than that.sounds like ****.do what ego has done. the only way

biggest thing causing the drone is the cannon mufflers everyone gets.

get a standard sports/vrx style muffler and you'll be surprised the sound it gives on full-throttle

get twin outlet pipes on each for the quad pipe look, would look sweet i say

get twin outlet pipes on each for the quad pipe look, would look sweet i say


gimme about a week :badgrin:

gimme about a week :badgrin:

sif copy me
http://i51.photobucket.com/albums/f351/Ashneel911/Magna/PIC_0016Medium.jpg
lol

sif copy me
lol

are your's moulded into the bumper? :cool:

not atm :cry:

but will be soon. plannin on gettin a TL VRX rear bar and ye getting a cut out and mould done for the other side.

I just talked to the ppl that im getting the exhaust done through on saterday and they quoted me on $350 for the extra exhaust and the piping, I though this man must be high off his nut but then i though this is a sweet deal im rollin with it so hopefully on Saturday after i get the new deck installed i will get the exhaust done after that, its all happening I CANT WAIT TO SHOW U ALL AT THE NEXT CRUISE :D

Yeah i did mine a few years ago.. Lov it.. will never go back..

Wasnt hard.. hardest part was getting the 3" pipe over rear crossmember..
Plenty room around the tank..

The hardest part was getting the standard look..

Grr those tail lights are so gay and those pics are so old, my new ones are better. ill need to get undated pics..

As you can see in last two crap pics.. tank aint the issue as it sits forward.. not like commodores at the rear..
http://www.mysti.org/albums/4MYEGO/DSC02706.jpg

http://www.mysti.org/albums/4MYEGO/ESC02697.jpg

http://www.mysti.org/albums/4MYEGO/DSC02619.jpg

http://www.mysti.org/albums/EGOPICS/3inch3.jpg

http://www.mysti.org/albums/EGOPICS/3inch2.jpg

Interesting that you mentioned ".. hardest part was getting the 3" pipe over rear
crossmember.." My exhaust pipe goes under the suspension in the middle section. I thought
with IRS, you don't need to pass the piping over the suspension crossmember.

i have a 3" dual exhaust on my awd :badgrin:

its 3" till it splits in to dual 2.5"

and its not loud at all.... just drones like a mudda****er under load on light throttle... at wot its like a V8 but not and in stereo lol best thing is that at crusing speed 100km/h etc... its quiet as!

its been tested and it's @ 86db where as stock exhaust with high flow muffler made 91db

its 4/4 crazy :nuts:

im going to get some 4" dump tips welded to the muffled body i dont like them tips not that you can see them unless you stick your head under it

http://i3.photobucket.com/albums/y69/andrewduaso/15112006120.jpg
http://i3.photobucket.com/albums/y69/andrewduaso/15112006117.jpg

The reason mine is so drony is not because its dual exhaust. its because of the mufflers and hotdog im using. Everything is straight through. And they are quite small mufflers. Hence the droning.

But i do get told the car sounds really nice from the outside when i plant it. So not all that bad. Yes it drones but i will replace the mufflers soon to stop that.

The pipe got split just after the rear axle. The pipe runs around behind the fuel tank and into a 2nd muffler. There is heaps of room.

The reason mine is so drony is not because its dual exhaust. its because of the mufflers and hotdog im using. Everything is straight through. And they are quite small mufflers. Hence the droning.

But i do get told the car sounds really nice from the outside when i plant it. So not all that bad. Yes it drones but i will replace the mufflers soon to stop that.

The pipe got split just after the rear axle. The pipe runs around behind the fuel tank and into a 2nd muffler. There is heaps of room.


The exhaust that u have on ur magna is like what im getting done but the actual exhaust tips aint round there a square shape but still looks awesome, I talked to the ppl again today and booked my car in for some ungodly hour in the morning to get it fitted, they said that they where going to just attach the new piping to the old piping instead of just attaching it to the cat, is that what everyone else has done.

I have ripped out everything after the cat. And replaced the pipe to 2.5" and new mufflers and hotdog.

Just split it after the rear axle. Its cheaper than running 2 pipes after cat/hotdog.

i don't like the tips on ego's car, they look plain

i just got it done yesterday and it looks sweet but i think that the ppl that i did it through only put 1 3/4 inch piping through because i looks a bit small, might have to go back and get bigger piping LOL, will post pics as soon as i find out how :bowrofl:

why did the make the rear bar so stupid on the 3rd gens?? my old TR's backside looked SO much better " untill it was smashed in that is " than my TJ's

i don't like the tips on ego's car, they look plain


Hehehe, thats the third set of tips ive had... I got over the other two sets as i thought they looked to ricey..:P Plain is better..:)

27395

A pic of my new twin exhaust i think its the second best thing on my car

hey would u have ne undercar pics, where bouts do they spiltup

27407

if you look hard enough the piping splits where i said it has and each bit of piping then splits to the cannons, both piping join together then lead back through the the stock 2 1/4 inch piping then back to the cat.

Did they say they had any problems fitting another muffler on the other side due to the fuel tank? Any droning at all? And the price, that included both mufflers? I'm really close to doing this myself with another VRX muffler.

I think you'll find that's the spare wheel well, not the fuel tank. the fuel tank is in front of the rear axle.

there's plenty of room to fit another muffler on the other side.

cheers,
.wook

I always thought that that was the fuel tank my bad, at first i got the right one done cost $250 for the exhaust and the new bit of piping, then eventually got the second one done for $350 all up $600 and what do u mean droning if you mean when crusin along at 2000rpm's you hear the exhaust then not as much any more, it did when i only had the one.

But other than that i love what was done, special thanks to the ppl a PROFIX Modbury for all the hard work and taking my money. :bowrofl:

I will have to show you in person D-VAN u dont live to far from me i saw you about a month ago driving around.

anyone know where the best place to get this done in SA? don't wanna get ripped off. any help appreciated. cheers.

I always thought that that was the fuel tank my bad, at first i got the right one done cost $250 for the exhaust and the new bit of piping, then eventually got the second one done for $350 all up $600 and what do u mean droning if you mean when crusin along at 2000rpm's you hear the exhaust then not as much any more, it did when i only had the one.

But other than that i love what was done, special thanks to the ppl a PROFIX Modbury for all the hard work and taking my money. :bowrofl:

I will have to show you in person D-VAN u dont live to far from me i saw you about a month ago driving around.

That's so cheap... I'm fine with keeping all the stock exhaust, just want to chuck another VRX muffler on the other side mostly for look, but really don't want droning. Yeah, droning is an annoying, bassy "mmmmmmmmmmmmmmmmmmmm" noise while driving at low revs.

It'll be good if i could check it out just to see what it sounds like. Maybe this weekend?

anyone know where the best place to get this done in SA? don't wanna get ripped off. any help appreciated. cheers.

where abouts in SA are you?

if youre up north, i know someone who will be able to do bumper mouldings, and a good exhaust shop

I think you'll find that's the spare wheel well, not the fuel tank. the fuel tank is in front of the rear axle.

there's plenty of room to fit another muffler on the other side.

cheers,
.wook

Yep, that's another US requirement to minimise chance of fire in a rear ender.

does anyone know if this has been done on a ts?

does anyone know if this has been done on a ts?

From memory, yes, someone on AMC had it done a few years ago.

That's so cheap... I'm fine with keeping all the stock exhaust, just want to chuck another VRX muffler on the other side mostly for look, but really don't want droning. Yeah, droning is an annoying, bassy "mmmmmmmmmmmmmmmmmmmm" noise while driving at low revs.

It'll be good if i could check it out just to see what it sounds like. Maybe this weekend?

yeah for sure have to catch up and show off our cars in front of all those common*****s LOL, and i would love to see your car again, im thinking in about 4 months if i can save up the money getting a VRX kit on me magna, because urs looks so nice.

where abouts in SA are you?

if youre up north, i know someone who will be able to do bumper mouldings, and a good exhaust shop

i'm in the hills up blackwood way. more concern about the exhaust job getting done properly at a fair price..cheers.

From memory, yes, someone on AMC had it done a few years ago.

cool, if anyone knows anything of this mod a pm would be greatly apretiated :)

Im in the process of grabbing a dual exhaust VRX rear bumper, will be looking at throwing on two Magnaflows (with dual pipes, therefore creating quad pipe) on either side, once done will let yas know :D

I love my new exhaust i have been getting very funny looks from commodore and ford P platers, but they never get to see the front i make sure of that lol, also had som WRX take a good look while he was behind me :bowrofl:

what mufflers you running?

27414

27415

i have no idea what they are but they look nice that why i chose them for the look not the sound here is a few pics

Anyone done or seen twins on a wagon?