got the ralliart rear and wheel arch flares fitted today! luckily it fitted over the current mufflers so i didn't have to cut it off to get it home

will be visiting the exhaust shop tomorrow, hopefully will have the quad pipes fitted by the end of the week! (and no, i will not be driving it like that... exhaust looks dodgy as!)

http://i32.photobucket.com/albums/d1/asylum83/100_2073.jpg
http://i32.photobucket.com/albums/d1/asylum83/100_2074.jpg
http://i32.photobucket.com/albums/d1/asylum83/100_2076.jpg

looks sick

u shmuck you got dualies!

what did that set u back if u dont mind me asking (just the moulding work)

looks fantastic!

Hey Asylum, I'm thinking of doing dual exhausts too. Rear bar looks nice btw. Is it me or does the left exhaust cutout seem slightly larger and more squared off?

Looks great. I would have been sceptical to think that a ralliart rear bar would go well with ground effects skirts and front bar, but seeing it - it really works.

looking good mate
the rear bar flows in nicely with the rest of the car
will look even better when those dualies go in :D
top stuff mate

just a quick question would that rear bar fit a TE? if so where could i get one

damn thats lookin good willy man :)

and Brad Pe**** yes it will fit

cheers guys :D

all up it cost $500 (mates rates) but that included painting the whole bumper and wheel arch flares. he said the ralliarts moulding turned out to be much more of a pain compared to other standard style cutouts, but he stuck to the original quote. to do a similar job, most places would probably charge about $500 for just the moulding work + paint

the right hand side of the left-hand cutout has a slightly sharper edge than the stock one, but shouldn't be too noticable with the exhaust in the holes. i think it is exagerated by the fact that the bumper section in the middle of the 2 cutouts is higher than the outsides, which makes it look a little odd from some angles.

i was worried that the bumper was going to be too wide for the skirts, and the curved-out section wouldn't line up either but luckily it all blends nicely, just trying to decide to do with the silver inserts to get them to match up better.

Looks good man job well done.

Awesome :bowdown:

Who did the work on the bumper? that's exactly what i want mine to look like. Do you know what they did to do it? How much did just the cutout cost do you know?

damn thats lookin good willy man :)

and Brad Pe**** yes it will fit

LMFAO that the content filter blocked half his last name...

car looks good :)

wow mate, that looks really good. Nice work

looks great if its done right, good on ya :thumbsup:

Hey will, looks great, have you got any updated pics with the exhaust now fitted.

Hey will, looks great, have you got any updated pics with the exhaust now fitted.

nah went round today but he was flat out with other work, so i said i'll get it done next week instead. no real fuss as i'm not driving anywhere at the moment anyway

Sweet looking ride!!

lookin good man!

i still want those pods! just been so busy with work.. :doubt:

cheers guys :D
i was worried that the bumper was going to be too wide for the skirts, and the curved-out section wouldn't line up either but luckily it all blends nicely, just trying to decide to do with the silver inserts to get them to match up better.

Looks good dude! I like :thumbsup:

You could possibly go with the bottom section of the bar silver... have the corners and the section on the back silver. That'd look ok, might need to find some way to taper it off tho n just have the corners silver :confused:

got the exhaust fitted before work today, quad matt-black pipes with 2x redback mufflers!

http://i32.photobucket.com/albums/d1/asylum83/magna/100_2102.jpg
http://i32.photobucket.com/albums/d1/asylum83/magna/100_2101.jpg

night photos are useless, will post up some better day shots if i can get them to show up in that too!


next on the list is definately getting rid of the green writing on the numberplates.

thinking black and silver, or white and red

Red writing on white would look ace with that rada boot.

http://i32.photobucket.com/albums/d1/asylum83/magna/100_2120.jpg

slightly better photo, still not great! matt black is so hard to pick up

that looks nuts man. how does the redback sound with the dualies??? is it drony?

Looking at doin exact same thing to the rear of mine, althou will be a vrx dual exhaust instead of ralliart... Im wanting to put two magnaflow's with dual outlets (chrome tips) in exhaust holes... I'll post some b4 n after pics on here saves wasting another thread.. (Providing thats all good with Asylum)....

that looks nuts man. how does the redback sound with the dualies??? is it drony?

sounds exactly how i was hoping it would, i can putt around town and its as quiet as stock (well, maybe a VRX/ralliart) but has a nice rumble when the foot is put down, almost as loud as before but without any drone at all!

no worries Damo_ooyar, i'd be interested to see how the VRX bar will look on a TH with dual cut-outs!

thats mad. i have SRT mufflers and as much as i love them coz they sound different to other magna ppl with exhaust i miss the red back sound and was planning on changing it later down the track.

thanks

Another one good job:dancin:

love it Will ...!

wow, looks really good. Can't wait to see it in person.

finally got my "new" plates :D no more green on the car! YAY!!

http://i32.photobucket.com/albums/d1/asylum83/magna/100_2269.jpg

went for the slimline rear this time, black on white. i think it suits the KH lights better than the big old one

Looks phat mate, might I be the first to say 'Nice Ass!'

Looks sweet man, good job!

freakin sweet! that looks mad as. i just followed my gf home and was looking at the rear of my car thinking....now what would look good there?

really nice mate. easy on the eye and tough at the same time.

Nice work Will - looks much better with those plates. Exhaust looks good too - still haven't seen it in the flesh!

Nice work Will - looks much better with those plates. Exhaust looks good too - still haven't seen it in the flesh!

nor have i will, would love to see this puppy in person hehehe, looks schmick, reall neat. Good work mate.

Hey Will, your ride ust keeps getting better and better.
Big fan of your work ;)

Gotta beg you to rice those tips with the rolled XR8 and SS commodore ones - they taper in opposite directions. Or level tips would suit too. My 5c. Looks the goods thou hey!?

Did you use 2x redback 2.5" or 2 x 2". Where is the split in the system?

Where have I been for this thread....

That seriously looks awesome, uber classy VIP. Can't wait to see it for real.

Top job!