please help, im stuck,i have removed most of the boot carpet. i have no idea how to feed the cable from my boot to my headunit. well im just stuck between the boot and the rear seats. i noticed a a hole so i got a hanger and fed it through there but couldnt see to finsd where it ends. please help. what is the easiest way to do so

Pull the back seat cushion off, and you'll be able to see where you can fees the cable through... Just the bottom half of the cushion

Theres 2 little pull things about where the left and right passenger would be in the rear.

After that you can pull off the 2 door jam things and get to the head unit easily.

how do i take off the back seat top half, also what are the pull thing in the seat that u guys mention

how do i take off the back seat top half, also what are the pull thing in the seat that u guys mention


I didn't find any need to remove the back rest of the rear seat, i pulled off the bottom half and from the boot I could see a gap in the bottom right hand corner of the boot right at the back... Fed the wires through the gap and then pulled them through from the other side.

down by the foot rests for back seat passangers there are two little black pull tags. pull them and it will unclip the seat. then just slide it out. to take off the upright bit, unscrew the screws from each side then the bolt in the middle. the seat then needs to be lifted upward off of its clips. this will give you easy access to run the cables, i did this on the weekend and it takes about 5 mins to get it all off. about the same to put back together.
:bowrofl: :bowrofl: :bowrofl:

sweet thanks, i just managed to feed the cable all the way through up to try to get it around the pillar near the right front passenger bit. also can ppl check if this is the right hole to feed the 8gauge through

sweet thanks, i just managed to feed the cable all the way through up to try to get it around the pillar near the right front passenger bit. also can ppl check if this is the right hole to feed the 8gauge through

Have a look at this link for the firewall...
http://www.wermspowke.net/wiki/index.php/Interior#How_do_I_get_my_cabling_through_the_firew all.3F

yeah i took a look at the 3rd gen facts already, just wanna doublecheck. they just said white grommet but no pics