Hey guys,

I want to get my doorcard off, so I can do my doorpods. Ive taken out all the screws, taken the winder off, plus the clips at the bottom. What I cant do is pull it off the door at the top, when I pull it up, it doesnt give, and Im afraid of putting much more pressure on it, in case I break it..

ANy help would be great, how would I go about getting it off..

Daz

Just confirm you have done all this:

Two screws on the side of the card

Three screws on the part under the mirror where the dash meets the card when the door is closed

One screw in the door handle, remove the handle

One screw underneath the armrest

One screw in the armrest, behind the plug

One screw behind the handle in the armrest covered with a clip

Remove the clip around the door lock (top of card, nearest to the middle pillar)

Remove winder

And thats it.

You just pull out the bottom plugs and then grab the handle of the armrest and pull the card up, I pull it from the back first, ie: side closest to the B pillar

And it should just pop up and then carefully pull the rest of it out.

Did you guys say door card or is there some green in my dinner? Yeah I know you mean door trim but :lol:

There is also at riangular bit that covers the mirror nuts, remove the small cover, remove 1 8mm nut and the cover will come off. This is important in order for the door trim to clear the cover.

There is also at riangular bit that covers the mirror nuts, remove the small cover, remove 1 8mm nut and the cover will come off. This is important in order for the door trim to clear the cover.

Ahh, so THAT is were I went wrong dammit. I'll do that now...

Thanks for your madmagna and killbilly, much appreciated..

Daz

There is also at riangular bit that covers the mirror nuts, remove the small cover, remove 1 8mm nut and the cover will come off. This is important in order for the door trim to clear the cover.

I never had to remove that actually lol...

Oh well...cant hurt to do that ;)