hi guys i have done a large search and cant find the answer... i know there is a thread that covers my first question i just cant find it.... so yeah... firstly... which models came out with which paras... e.g one piece/two piece... and also.... if i was swapping exec headlights into a verada and vice versa.... what wiring woudl need to be done to fit the exec lights in the verada? any help would be appreciated... cheers... im fairly sure its a KE too.. could be KF tho...
cheers,
Trav..

http://www.aussiemagna.com/forums/showthread.php?t=42157

theres the wiring, there is heaps of threads dvs posted about wiring.

verada's come out with 2 peice, diamante come out with 1 peice.

the sports and ralliart and vrx come out with parabolics too

I ought to kill you now.

Look at the DIY in the mods thread.:doubt:

http://www.aussiemagna.com/forums/showthread.php?t=45652

Guessed you did not search harder. ALL your answers should be there if not pm me. I believe everyting you ever needed to know is in that thread.

hi yer i did read the diy thread.... its not the wiring of the parras into my car im worried about, but my exec lights into the verada? the rest is dandy.. just didnt think it was covered for the opposite way around... however im known to be blind at times so if its in there someone let me know... ta...

Get a whole new wiring relay man. Bring it to an electrician if you not sure what to do.
Why would a Verada want to do the opposite? As it have proper driving lights already.

Title of your thread is wrong should be Executive lights convert from Verada.

yer y would u wanna go the other way

So you can see things at night!

You can whack a set of 100/90's and 100's and relays and be able to see far, far better than with the parabolics...

I have this setup at the moment after a crash meant I had to rebuild the xenons...

I don't miss the xenons that much with this setup - its crazy bright :nuts:

Cheers
Heath Young

ok.... the deal is... i am swapping my exec headlights with the paras out of a family friends verada as they dont care what lights they have and i want paras... this way i am getting a sweet deal.. so... this is why i wanted to know about wiring exec lights into the verada.... can anyone help with it or no?
cheers,
trav..

In this case you should at least get an auto electrician to redo the relays on the verada, is a fair deal mate. And I am gueesing is a two piece parabolics so if You can swap the headlight brackets do so too. I am not in position to show a convert though I am sure I can do it. The best way is to relay the wiring on the Verada.

Cheers!

Its not *really* all that hard.

If you wanted to go simple, just swap the connector pins for the low beam on the verada (if you dont, then the high beam filament is illuminated in the low beam position) to do this just open up the back of the connector and swap the wires from I I to _ I looking at the plug rear (wire side).

Easy.

Now for your exec, look at the para fitting instructions.

I'm telling you now though, it is a downgrade - the verada lights may look good, but their performance seriously sucks :( especially on highbeam!

Cheers
Heath Young