PDA

View Full Version : TP Engine dropped 2 cylinders



Robo
18-03-2007, 08:41 PM
Driving along, my car started running very rough. Got it home, cylinders 2 and 3 dont seem to be doing much when i pulled the spark lead off. Gave it a compression test and its confirmed numbers 2 and 3 producing only 30psi , the others 170psi.

So whats the cause?? Dropped valves??? Im thinking timing chain has jumped as i have had previous problems with it. But why only 2 cylinders?? Shouldnt it be all of them if the timing chain has jumped??? Pulled the rocker cover off, cam seems to be fine pressing down on the valves.

Dave262
18-03-2007, 08:53 PM
Timing chain will cause problems with every cylinder usually. It seems rather strange that it would just suddenly happen though. Normally a valve not sealing would happen gradually over time.

Does your car run lean? It's possible maybe you have a couple of burnt valves. It can happen, although depends heavily on what mods you have already done to it. I would also check things like gasket, although again it's unlikely as it wouldn't cause compression to drop that low...

BCX7
19-03-2007, 01:14 AM
head gasket between cyl 2-3

happened to mine ages ago.

Robo
19-03-2007, 05:14 PM
I guess i better pull the head off then. Do i have to pull the timing case cover off to pull the head off?

magna buff
19-03-2007, 05:33 PM
nope will give you a link

timing /head removal down the page a bit

you will need a VRS kit tension wrench sockets and 22 mm spanner or shifter

page one ................everything you need to know with pictures

http://www.mitsubishiclubaustralia.com/forums/viewtopic.php?t=814&start=0

and check the wiki site out

Robo
19-03-2007, 06:05 PM
Thanks for that Magna Buff:D

Robo
09-04-2007, 08:43 PM
Thanks guys, took the head off, only took an hour and a half and broken head gasket between no.2 and no. 3 cylinders.

Now for the new head gasket and sell it off

Cheers

magna buff
09-04-2007, 09:38 PM
yep thats about how long one would take to fit

sends out to all victorians a public anouncement about
some guy may be trying to flogg off suspiciously good looking tp magna with new head gasket fitted soon :bowrofl:

Robo
10-04-2007, 04:27 PM
sends out to all victorians a public anouncement about
some guy may be trying to flogg off suspiciously good looking tp magna with new head gasket fitted soon :bowrofl:

Going Cheap on EBAY