PDA

View Full Version : WHAT MODS TO GET A 14 sc ET IN TH-TJ 3.5?



caspaflip
24-03-2007, 04:54 PM
Hi guys,

I have now purchased a TH 3.5 auto sedan.

Ive seen a few manuals on here who have dipped in the high 14 et with limted mods.

What mods would get me a high 14 second pass other than a exhaust and cai on a 3.5 auto?


Cheers
Mark.

Sports
24-03-2007, 04:56 PM
sell it and buy a manual

I did a 14 with a K&N filter as the only 'mod' i did

Black Beard
24-03-2007, 05:00 PM
:stoopid:
Only mod that will get a 4spd auto into the 14's that doesn't involve extensive engine work is a manual conversion and a bit of practice.

andrewd
24-03-2007, 05:01 PM
$650 for nos, easy 14's

i once found a site where they rented a car in the us a 3spd auto 4cyl chrysler neon fwd, and with just nos alone they gor it into the 12's..... note they also rooted the engine, but did manage high 12's :badgrin:

so with maybe not so much nos you'll be right :D

Spackbace
24-03-2007, 05:42 PM
hmm imagine taking that back to the hire company lol

EVO6BOY
25-03-2007, 08:22 AM
Unfortunately a auto is not going to make it into the 14's without extensive mods as the auto is just not up to the task.

Ive tried before with an auto and have decided with the one i have now that although i've modded it, im just happy to cruise with it rather than try to get quick times with it

caspaflip
25-03-2007, 09:14 AM
Thanks Guys,

Thanks for the advise i wont be selling and getting a manual!

What sort of times can be produced with a auto then with minor mods?

Disciple
25-03-2007, 09:36 AM
Thanks Guys,

Thanks for the advise i wont be selling and getting a manual!

What sort of times can be produced with a auto then with minor mods?
High - Mid 15's?

Spackbace
25-03-2007, 03:02 PM
maybe try to source a 5spd tippy? otherwise it would have to be forced induction ideally, or cam work etc etc

and being the 4spd, i'd say more like high 15s i think, but it would be good for ET racing (like the 4, 6 and rotaries here in perth)

Magtone
26-03-2007, 06:18 AM
maybe try to source a 5spd tippy? otherwise it would have to be forced induction ideally, or cam work etc etc

and being the 4spd, i'd say more like high 15s i think, but it would be good for ET racing (like the 4, 6 and rotaries here in perth)

:stoopid:
i have a 5spd tippy and only managed a 15.3 with my mods minus the cam work emanage and throttle body. I am hoping to now get there but have spent another $3k for it.

KING EGO
26-03-2007, 05:42 PM
I thrashed my manual Stock TJ and got me a 14.989..:P


will need a few extra mods to get the extra time.. you will be a mid 15 now..

Id say start looking at and piggy back or something..:)

EVO6BOY
26-03-2007, 08:37 PM
More like start looking at the classifieds for a Ralliart Magna

Paulie
26-03-2007, 08:41 PM
I have a Tippy TJ AWD (5 speed 3.5ltr V6) and i'm getting 15.6 wif only a Cannon exhaust. I'm about to put a cold air intake onto it. I'm thinking about a maual conversion to...does anyone have a rough idea of prices and who does it in Perth?

Cheers

Gas_Hed
26-03-2007, 08:51 PM
I have a Tippy TJ AWD (5 speed 3.5ltr V6) and i'm getting 15.6 wif only a Cannon exhaust. I'm about to put a cold air intake onto it. I'm thinking about a maual conversion to...does anyone have a rough idea of prices and who does it in Perth?

Cheers

So youd be getting a 16.7 without right? or have I been hanging around too many Lancer owners?

bob_saget
26-03-2007, 10:04 PM
I have a Tippy TJ AWD (5 speed 3.5ltr V6) and i'm getting 15.6 wif only a Cannon exhaust. I'm about to put a cold air intake onto it. I'm thinking about a maual conversion to...does anyone have a rough idea of prices and who does it in Perth?

Cheers

that should bring it down to about 14.8 eh

Spackbace
26-03-2007, 10:58 PM
I have a Tippy TJ AWD (5 speed 3.5ltr V6) and i'm getting 15.6 wif only a Cannon exhaust. I'm about to put a cold air intake onto it. I'm thinking about a maual conversion to...does anyone have a rough idea of prices and who does it in Perth?

Cheers

over $1500 in perth, and i dont think any of the places are knowledgable in it unfortunately

_stonesour_
26-03-2007, 11:03 PM
I have a Tippy TJ AWD (5 speed 3.5ltr V6) and i'm getting 15.6 wif only a Cannon exhaust. I'm about to put a cold air intake onto it. I'm thinking about a maual conversion to...does anyone have a rough idea of prices and who does it in Perth?

Cheers

manual conversion in an AWD is just not feasable unless u wanna spend big big biiig money

Magtone
27-03-2007, 07:27 AM
that should bring it down to about 14.8 eh


haha no chance:nuts: Take my list of mods for example: Zorst extractors cai panel hi flow catetc also 5 spd tippy and managed a 15.3 I think you need alot more than that as AWD have less power atw because of the distribution. 15.6 is an o.k run, but it takes a bit to knock half a second off your time. Now that i have cams it'll be better but have spent money to get it....

heathyoung
27-03-2007, 10:48 AM
No, not half the power, half the torque. Power is a little down due to drivetrain losses (as to be expected) and slower due to the weight.

The only way is to start looking at forced induction.

Cheers
Heath Young

Magtone
27-03-2007, 11:12 AM
No, not half the power, half the torque. Power is a little down due to drivetrain losses (as to be expected) and slower due to the weight.

The only way is to start looking at forced induction.

Cheers
Heath Young

Did someone say half the power:confused:

bob_saget
27-03-2007, 07:16 PM
haha no chance:nuts:....

straight over your head i see... little hint... starts with "sar" ends with "casm".... oh, there i go again :)

Paulie
28-03-2007, 11:08 AM
Damn, i really didn't want to have to look a forced induction because i dont have the money to do it yet :cry: _stonesour_...can you please tell me why it's not feasable to do a conversion in an AWD? I knew it would be harder but not too much harder?

Magtone
28-03-2007, 11:15 AM
straight over your head i see... little hint... starts with "sar" ends with "casm".... oh, there i go again :)


meow...

andrewd
28-03-2007, 03:46 PM
Damn, i really didn't want to have to look a forced induction because i dont have the money to do it yet :cry: _stonesour_...can you please tell me why it's not feasable to do a conversion in an AWD? I knew it would be harder but not too much harder?

do a search the topic has been covered many times, and let me say firstly, anything is possible, it's just how much money you are willing to spend to make it a reality.... and for whats involved.. it just isnt worth it

MR_WOODY_TJ
28-03-2007, 05:31 PM
do a search the topic has been covered many times, and let me say firstly, anything is possible, it's just how much money you are willing to spend to make it a reality.... and for whats involved.. it just isnt worth it
spot on.... i have a tj fwd auto and i figure 1 sec over 400mtrs isnt worth a $2800 convertion (approx) $95 ram pod and $240 exhaust thats putting aside the extractors little throttle body work chips ect.... its like this. drive it or sell it!!! i am thinking for 20k you can get a 01 tj vrx 5 speed manual ($12,500) super charged ($5,200) on air ride suspention ($2899) flame thrower kit ($free) all up aprox ($21,000) call me crazy but i know what id do:headbange

TZABOY
28-03-2007, 05:40 PM
spot on.... i have a tj fwd auto and i figure 1 sec over 400mtrs isnt worth a $2800 convertion (approx)
dude, $2,800 is cheap to get 1 second off your quater mile time if racing is your thing. I've spend 7 on the sprintex kit and if i got a full second off my N/A time, i would be doing back flips. lets hope i do back flips next wednesday night lol

bob_saget
28-03-2007, 07:18 PM
meow...

haha its a raawwwrrr! thank you very much.... im a tiger!!! lol

EZ Boy
28-03-2007, 09:19 PM
Hi guys,

I have now purchased a TH 3.5 auto sedan.

Ive seen a few manuals on here who have dipped in the high 14 et with limted mods.

What mods would get me a high 14 second pass other than a exhaust and cai on a 3.5 auto?


Cheers
Mark.
Keep an eye on this thread and you'll be on the way. http://www.aussiemagna.com/forums/showthread.php?t=35528