I have been looking at lowering the KJ and am looking at the kings springs catalogue.

http://www.kingsprings.com.au/kings_master_catalogue.pdf

I cant make any sence of it and was wondering if it is wrong.

To lower a TJ/KJ by 45mm u need
(Front)-----------(REAR)
KCFL -42 and KCRL -43

To lower by 30mm u need:
KCFL -42SP and KCRL -43SP

But to lower a wagon by 30mm u need:
KCFL - 42 and KCRL -39

Does this seem strange that both sedan and wagon use the same part number on the front but one is 30mm and one is 45mm. I'm thinking they have the 30mm and 45mm round the wrong way.
I lowered my KH with these part numbers and it was only lowered 30mm.

Anyone else agree?

KCFL - 42 is a 45mm drop, i can't see in that catalogue where it states it lowers it by 30mm though for the wagon. It will lower it 45mm at the front and i assume 45mm at the back too (although doesn't say for the rear ones).

I lowered my KH wagon with what is stated in the catalogue being KCFL 42 front and KCRL 39 and it was only dropped by 30mm. Thats what i'm getting at, KCFL 42 is a 30mm drop because i've done it on the wagon and i'm thinking they have the listing around the wrong way.

Just got this e-mail from Kinds Springs.

The AWD uses the same coil as the FWD.

Part number KCFL-42SP and KCRL-43SP are a 25-30mm lowered only for the sedan and the wagon (wagon fronts only).

The KCFL-42 and KCRL-43 will lower the car approx 35-40mm from standard height.

Part number KCFL-42SL will lower the front (sedan or wagon) approx 45-50mm.

Personally I only use the KCFL-42 and KCRL-43's to lower the car around 35-40mm, as I do not think the SP's lower the car enough.


Wasnt aware that they had a SL. Maybe my wagon is dropped by 30-40mm. Never thought it was that low.

I lowered my KH wagon with what is stated in the catalogue being KCFL 42 front and KCRL 39 and it was only dropped by 30mm. Thats what i'm getting at, KCFL 42 is a 30mm drop because i've done it on the wagon and i'm thinking they have the listing around the wrong way.

Just got this e-mail from Kinds Springs.

The AWD uses the same coil as the FWD.

Part number KCFL-42SP and KCRL-43SP are a 25-30mm lowered only for the sedan and the wagon (wagon fronts only).

The KCFL-42 and KCRL-43 will lower the car approx 35-40mm from standard height.

Part number KCFL-42SL will lower the front (sedan or wagon) approx 45-50mm.

Personally I only use the KCFL-42 and KCRL-43's to lower the car around 35-40mm, as I do not think the SP's lower the car enough.


Wasnt aware that they had a SL. Maybe my wagon is dropped by 30-40mm. Never thought it was that low.
In the catalogue it states KCFL-42 to be a 45mm drop, so where are they pulling this 35-40mm from :nuts: . Superlows should drop 60mm, so something suss going on there.