Im trying to paint the black panels around teh centre console but i cant figure out how to pull it apart pls i need help badly

Im trying to paint the black panels around teh centre console but i cant figure out how to pull it apart pls i need help badly

Like where the radio is?

yeh like around the radie and down around the gear knob and also eventually up on th tope of teh dash around teh vents and infront of speedo and stuff

yeh like around the radie and down around the gear knob

ahhhhhhhh ok
2 screws under the ash tray
2 screws one either side of the centre console (one next to driver one next to passenger)

the that bottom bit should come out, to take it apart, flip it upside down to see all the screws holing it together

and for the radio bit of console;
pretty sure once the bottom console is removed it'll expose 2 screws holding the radio part in
and if that doesn't bring it out, remove the heater surround (2 screws, put your head underneath to see em) and it should come out...
eh im outta ideas

ok well that gives me sum help willt ry tomoz after work

Pfff.........tomorrow? you said you needed help BADLY
Now that ive given you this help go do it now!!!
It'll only take 10 minutes with a screwdriver

Go forth

aw come on its dark and the floors wet saftey hazard lol jks nah ive got to much apprentice stuff to do

for the top parts its a bit more dificult

remove dial fascia(will show a screw on left and one on right)

remove glovebox, remove glovebox liner (two screws in footwell and four on lineer (they're obvious))

get ur hand in there as far up as possible behind the dashborad until you feel a butterfly screw. there's two of them. in the middle of the passenger side and one closer to the air vent (from memory) unscrew these...

be careful when you pull it out though...it'll be tough if it's the first time it's been removed. also, there's a notch in the dashboard and also in the trim which fits together in the left corner which holds the vent in place...pplay around with it gently and it'll come out.

good luck...you'll need about 30mins for the top trim...

ty thanks mate hopefully i wont ahve to much trouble doing it