PDA

View Full Version : Pioneer DEH-P3950MP Head Unit



V3N0M
14-12-2007, 12:38 PM
Hey guys i installed this head unit last weekend and all is great :D sept it gets a little hot but i think thats from the way ive connected the wires temporarily, anyways my problem is at night when i turn my lights on it doesn't dim! and its as bright as a mofo! does anyone know if this HU has a dimming feature? if not is there a way to force it to dim down a bit? cant find anything about it on the net or on here or even in the manual lol..

Thanks in advance!

James

Fantaysia
14-12-2007, 12:51 PM
Decks usually have an illumination wire and the manual should tell you where to connect it. Also make sure your power wires are not a temp connection or they could short out. My friend's call me anti-solder pvc tape king, but you should probably do it properly :cool: The heat is normal so long as it's not catching fire.

Lugo
14-12-2007, 12:53 PM
Theres no dimming function on these models (at least not that I found). I've got a 2950MP atm, which is exactly the same except 1 pre-out instead of 2 and red LED's. I don't find mine to be a problem, but then the AE82 doesn't angle the headunit up like Magna's do.

V3N0M
14-12-2007, 01:05 PM
cheers for the quick reply guys ^_^, ahwell i will just put up with it, the only wires it had was ACC, Power and speakers, and a blue one which i think is for remote antenna, getting a soldering iron and stuff soon so will be done properly when i get that atm its just twisted and elecy taped up lol

Mr İharisma
16-12-2007, 07:37 AM
You should be able to adjust brightness, usually you have to turn the unit off and then hold down the function button. Thats how you adjust your clock etc ( well on the older one anyway ).