I've got a TH Magna and just wondering if the rims off a CH Lancer VRX would fit??? I know the PCD is the same (5x114.3), but not sure of the offset or hub bore diameter. For Magna's i'm pretty sure the offet is 46 and the hub bore diameter is 67.1mm. Anyone know the details for the Lancer? Btw here's a pic.

http://i36.photobucket.com/albums/e32/bonezee/Misc/VRX%20Lancer%2005/mini-lancertint2.jpg

Hi, I'm almost positive that YES they will fit.

I'd say a 98% chance!

If it comes with the tyres off the Lancer, you'll need to change those, as the Magna uses higher profile ones.

Obviously to keep the speedo correct and also maintian the ride height & not look silly.

The rim will take a 215/60/16 or similar.

They are 16x6, PCD is 5x114.3, offset is 46, same as magna, could not find Centre Bore size.

Thanks for the help guys, the main thing that concerns me is the centre bore size because if it is too small they simply will not fit, whereas if it is bigger then it's a problem that's easily fixed. Anyone out there have any idea what it is?

When checked DBA catalogue found that centre hole of the discs for lancer is the same as the magna ones. Based on that I am assuming that Centre Bore is the same on both cars.

When close to Mitsubishi dealership just go to their Parts department and ask them to check CB size for you. They were very helpful when I enquired about Magna VR-X S II wheels.


http://www.dba.com.au/2006/PDF_CATALOGUE/Catalogue_AUST/2007_AUSTCatalogue_17122007.pdf

I have an 03 TL and I bought the car with 16" Lancer rims on it just like the ones in your photo. Now I am looking to sell them.

PM pending, you need to clear some space in your inbox