OK i have a amp but just don't know where i should put it. any ideas?
P.S its a tp sedan
thanks

OK i have a amp but just don't know where i should put it. any ideas?
P.S its a tp sedan
thanks

under the seat....
bolt it under the parcel shelf...

under driver/passenger seat
make up a beauty panel for the boot and mount it on that


']bolt it under the parcel shelf...

please do not do this
it's not good for the amp's proformance

do u have a spare tire if not make a custom floor and mount it to that or make a flase floor cut a piece out the size of the amp make a mounting board under that and run a perpex cover over it so it look's reseased under the floor




spelling might be a little of

thanks its currently under the seat but basically sitting there just brassed in.. is it hard to get the passenger seat out. and i don't really want to put it in the boot cause i like my boot room and i have 2 10" subs in there at the moment

run it under the floor so it's like a false floor for the amp u will still have your room for your sub's and the amp won't get damaged at all

under driver/passenger seat
make up a beauty panel for the boot and mount it on that



please do not do this
it's not good for the amp's proformance

Yeah, But Ive had a low quality kenwood amp bolted under my parcel shelf for 12 years and it never failed once.

']Yeah, But Ive had a low quality kenwood amp bolted under my parcel shelf for 12 years and it never failed once.

i guess it has something to do with the cooling of the amp
i know that i can't mount my rockford upside down due to the heatseeks on the amp

my mono block's turn of if i mount them upside down

Why is it so hard to get your seat out???

For the 2nd gen you just unscrew 4 bolts and lift the seat out the car.

Ollie

thanks all. just finished installing it.
screwed it onto the back of the 2 10" box in the boot

thanks all. just finished installing it.
screwed it onto the back of the 2 10" box in the boot
so wat do you do when you get a flat tire and need to get the sub box out to get to the spare tyre?

']Yeah, But Ive had a low quality kenwood amp bolted under my parcel shelf for 12 years and it never failed once.
12 years??? You installed it when you were 6?


Most analouge amps can not be mounted upside down, due to internal circutry and old techniques, if you want flexability for installs, get a digital amp :)

so wat do you do when you get a flat tire and need to get the sub box out to get to the spare tyre?


take it out then change the tyre then put it back in:nuts:

Most analouge amps can not be mounted upside down, due to internal circutry and old techniques, if you want flexability for installs, get a digital amp :)


whats the difference between analouge and digital amps?

12 years??? You installed it when you were 6?


Most analouge amps can not be mounted upside down, due to internal circutry and old techniques, if you want flexability for installs, get a digital amp :)

Well I didn't install it smartass :P But yes as i said we've had one bolted to the parcel shelf pretty much since we purchased the car and its been fine :P

put it on the bonnet :) something different

']Well I didn't install it smartass :P But yes as i said we've had one bolted to the parcel shelf pretty much since we purchased the car and its been fine :P
And what does it do for you today? lol

Is there something wrong with throwing it on the back of the sub box?

Analog An electrical signal in which the Voltage (or current) Waveform has the same form as the original acoustical Sound waves.


Digital The representation of a quantity in numeric form, normally in binary. In audio, this means that waveforms of sounds are sampled at very high frequencies, and each sample is stored in numeric form, so that the Waveform can subsequently be reconstructed.



thats the difference between analog and digital .......... as asked early

Analog An electrical signal in which the Voltage (or current) Waveform has the same form as the original acoustical Sound waves.


Digital The representation of a quantity in numeric form, normally in binary. In audio, this means that waveforms of sounds are sampled at very high frequencies, and each sample is stored in numeric form, so that the Waveform can subsequently be reconstructed.



thats the difference between analog and digital .......... as asked early


thanks now i fully understand lol

And what does it do for you today? lol

Is there something wrong with throwing it on the back of the sub box?
Bolted my little brother's four channel amp onto the back of his sub box last weekend, works fine... He loves it. Little MTX thunder splits hammer up front giggity.