can some one please tell me how to get the front lights off. i no i need to take the grill off and then to bolts on top and to on the grill side of the light but what next. it feels like its coming out but i no i.v missed something:nuts: :nuts: :nuts: :nuts:

:bump: :bump: :bump:

patience oh young one. not all are on the forums to answer ones questions immediately.

it can be a little hard to get the lights out you might need to drop the sides of the front bar a little to help it slide out. is it one piece parras or two piece? if its one piece then you will most likely have to drop the side of the front bar a little to give way for the lights to slide out

p.s :nuts: :nuts: :nuts: :nuts:

lol

My memory is hazy, but I'm pretty sure there was a bolt underneath the headlight too. You pull back the plastic at the front of the wheel arch and shine a torch up, and you should see a bolt up there.

I could be getting confused with the bumper, but I do recall having the same problem as you when taking my headlight out...

Put mine in the other day with some help lol, anyways yes there is a bolt under the indicator, should be able to reach it if you put your arm up underneath the bumper, it may take some time, lol

mike

the back or the front:nuts:

front bumper, if you reach under, you should be able to feel it, if not jack the car up a bit and have a look with a torch.

mike

:rant: cant find it :cry: i'll keep trying

if i remember correctly that bolt is just for the indicator bracket which comes out with the light assembly anyways

unless he has one piece parras then i dont thing he will have that bracket or bolt

so asking again "do you have one piece or 2 piece parras?"

if that dosnt make sense hope this does "is the headlights plastic of glass?

if that also dosnt make sense what about this "is there a gap between the indicators and the headlight?"

yeah there a one peace light:cool:

in that case i really dont thing you will have that bolt that everyone is reffering to

what you need to do is undo the bolt from inside thats closed to the wheel arch while allow you to flex the front bar a little bit which is just enough to slide the lights out.

in that case i really dont thing you will have that bolt that everyone is reffering to

what you need to do is undo the bolt from inside thats closed to the wheel arch while allow you to flex the front bar a little bit which is just enough to slide the lights out.

thanks champ:thumbsup:

You are better to drop the front bar or you will scratch it :(

You are better to drop the front bar or you will scratch it :(

**** i know that now.:rant: its all good:bowrofl: