G'Day all,
Pulled up at a servo in the Adelaide Hills, Turned motor off, got fuel, Went to start it . All I get is cranking, no firing. Got spark to the coil, no spark at plugs. it is not the fuel. Any suggestions welcome....Thanks:confused:
Roger

Sounds like your distributor.

Hey,

Crank angle sensor,Ignition module,rotor button,id check the lot

Steve

Everything has been checked except crank angle sensor. I have the distributor out now going to check it tomorrow. damn car broke down 50kms from home.

any compression? your timing belt tensioner may have let go and will not spin the cams....
or maybe jumped some cogs?

Valve timing & Distributor timing marks all line up, bought a Dissy today, will try that tomorrow.
Managed to get the Power Transistor too.:badgrin:

Changed Distributor & Power Transistor, Still no go.
Timing Marks on Cam Pulley & Harmonic all line up. Dissy is in the right place, so it is not mechanical timing issue. All fuses & relays check out ok.
Looks like I will have to tow it to an Auto Electrician. If he puts a diagnostic thingy on it, it should show the problem.Trouble is it is Broke down 45 kms from home:cry:

The Computer is dead.:cry:

The Computer is dead.:cry:

I have a an ECU From a Manual KS Verada Touring wagon here.
Chasing $90 for it PP. Let me know..

Apparently, it has to be this one