Hey guys,

I've done some searching on the site, but needing a little bit more info.

I have pedders replacing a clicking bearing plate in my KH 'Rada.

They have now told me that my RHS engine mount is pretty shot and needs replacement.
I kinda believe them as a i have slight vibrations at idle and sometimes at higher speeds.

The only thing is that they're telling me there are no aftermarket engine mounts and quoted me about $315 for a genuine one fitted - which i think is a little steep.

From what I have read on the forums, there is ASP rubber that offer them (but that thread was a little old).

Can anyone recommend any other place I can check out, and also your experience with genuine oil filled mounts, and the Rubber/poly aftermarkets?

Thanks guys.

Hey guys,

I've done some searching on the site, but needing a little bit more info.

I have pedders replacing a clicking bearing plate in my KH 'Rada.

They have now told me that my RHS engine mount is pretty shot and needs replacement.
I kinda believe them as a i have slight vibrations at idle and sometimes at higher speeds.

The only thing is that they're telling me there are no aftermarket engine mounts and quoted me about $315 for a genuine one fitted - which i think is a little steep.

From what I have read on the forums, there is ASP rubber that offer them (but that thread was a little old).

Can anyone recommend any other place I can check out, and also your experience with genuine oil filled mounts, and the Rubber/poly aftermarkets?

Thanks guys.
I got mine off ebay for $130 delivered to my door and my mechanic charged me $20 to install it (mates rates) and im pretty sure its aftermarket!

im pretty sure tht i got mine fitted for about 200 and it was genuine..
Although again mates rates, who would of got it at cost price too, so not much help to ya. sorry! haha

I paid for Genuine RHS (Drivers) Top Engine Mount in my first TJ, an Exec '01 model. Its been in for a year or so.

Have since bought a very rough TJ Sports ('02 Manual), and same engine mount was shagged. Have replaced it with a FleaBay aftermarket one - its been on maybe 6 months and seems to be going OK.

Genuine, IIRC, was about $240-00 and the FleaBay one was $115-00 plus postage. I will say this, the damaged OEM mount was quite complex, lots of effort gone into moulding ridges etc in the rubber - suspect these are also oil-filled? (there was certainly nothing like oil left in the one which came off the Sports - it was flogged to death).

BTW, I have kept at least one of the damaged/removed mounts, in case I ever want to try a solid Urethane-filled mount - as I think an AMC member does these?

Maybe someone has longer experience of having the aftermarket ones fitted - mine is 6-12months only and maybe 15-20K kms, with no signs of trouble yet.

what about trying your local wreckers, you might be able to pick a good one up from there

I paid for Genuine RHS (Drivers) Top Engine Mount in my first TJ, an Exec '01 model. Its been in for a year or so.

Have since bought a very rough TJ Sports ('02 Manual), and same engine mount was shagged. Have replaced it with a FleaBay aftermarket one - its been on maybe 6 months and seems to be going OK.

Genuine, IIRC, was about $240-00 and the FleaBay one was $115-00 plus postage. I will say this, the damaged OEM mount was quite complex, lots of effort gone into moulding ridges etc in the rubber - suspect these are also oil-filled? (there was certainly nothing like oil left in the one which came off the Sports - it was flogged to death).

BTW, I have kept at least one of the damaged/removed mounts, in case I ever want to try a solid Urethane-filled mount - as I think an AMC member does these?

Maybe someone has longer experience of having the aftermarket ones fitted - mine is 6-12months only and maybe 15-20K kms, with no signs of trouble yet.

kelpro make the aftermarket mounts for the magnas, they are around 120-150 give or take, also with the fleabay ones, theres been a few on here that the inner crush tube wasnt straight and wouldnt go in.

ScreamingTE and Megatron does poly mounts atm.

I can do you a brand new mount for $120.00

PM me if you want one, these are all checked before I use them so they will not have the issues that the e-bay ones have where the rubber bush is off centre

I can do you a brand new mount for $120.00

PM me if you want one, these are all checked before I use them so they will not have the issues that the e-bay ones have where the rubber bush is off centre

Sounds good mate.

Are they oil filled or rubber/poly mounts?

Also, where r u located?