i'm chasing some dimentions of a 380 inlet manifold

just need the height right where the bend is, from the join for the lower manifold is. and the witdth from approx the front face of that join back to the firewall side, and the pass side where it's a bit bulgy where the throttle sticks out..

just incase i'm the only one that understands that jibberish here is a pic, i took it from the 380 section about CAI's.. only one that would work on this computers ban on Hosted images..


cheers,

http://img220.imageshack.us/img220/880/34826083vr5.jpg

Matty.

Just took some measurements, and they are:

Height (from face to top) 120mm

Width (drivers side back to firewall) 530mm

Width (passenger side back to firewall) 490mm

Height is the same right across.

Width is a little iffy, as I took the measurements back to the sound deadening lining on the firewall and not the metal behind.

Passenger side width is less because the firewall curves out (into the engine bay) a little here.

KJ.

Sorry mate, just re-read your post, and now realise you want the width of the manifold, not the distance to the firewall. Thought that was a strange measurement to want!

Anyway, width on drivers side is approx 290mm and on passenger side approx 320mm.

Only approx because can't get accurate measurement without taking it off.

KJ.

nah mate, thats brilliant thanks :)