Could you guys please post pics if you have mounted ur fuse holder in the factory battery box. Just trying to think of the nicest place to mount it.

I have the 4awg coming into the box the same as the factory leads.

Can't see how I can do it without having such a sharp bend.

Could you guys please post pics if you have mounted ur fuse holder in the factory battery box. Just trying to think of the nicest place to mount it.

I have the 4awg coming into the box the same as the factory leads.

Can't see how I can do it without having such a sharp bend.
I mounted it on the right-side of the battery box on the outside, it looked quite good but the cheapass fuse holder bracket snapped :(

Is this for the +12V positive running to the boot?

If so, mount the fuse within 15cm of the terminal.

Is this for the +12V positive running to the boot?

If so, mount the fuse within 15cm of the terminal.
He already knows this I assume, thats why he wants to mount on the battery box... he was asking where in the battery box to mount it... I see mounting inside being a problem though, might be hard to pull off. Right-side on the outside would be a better solution imo.

Didn't take any photos of it when I installed mine, but I cable tied it to the black box/bucket that the battery sits in.

Mitch. is ur fuse holder in the box then?

Mines in the box, just fits in nicely, I'll take a photo later after work.

Cut a bit of 4ga 6" this morn, not exactly many options might have to make it longer.

a right angle fuse holder would be handy

If you that worried about putting it in the battery box, get a thin bit of aluminium and bend it to mount the fuse holder in your box. A simple right angle bend will do.

i've got 4 gauge wire and my fuse holder sits in front of the battery easy to access aswel

What have u secured it to? The pole of the battery strap?

just bumping this guys!
I'm after some pictures of some fuse holders in the engine bay

I have a chunky ass fuse holder and don't know where to mount it without it looking stupid?

ayne;1157079']just bumping this guys!
I'm after some pictures of some fuse holders in the engine bay

I have a chunky ass fuse holder and don't know where to mount it without it looking stupid?

i used a bit of doubled sided tape in both my 3rd gens, they sit on the strut tower on the side and + they are wraped in the black plastic stuff to hide the cable

i used a bit of doubled sided tape in both my 3rd gens, they sit on the strut tower on the side and + they are wraped in the black plastic stuff to hide the cable

yeh I've put black braid over the wire to make it look stock but this fuse holder is massive!

this is it: http://www.ryda.com.au/v/vspfiles/photos/SAWFH04PT-2.jpg

i thought about sticking it on the side but it sticks out like mad