hi this is my first thread cause i carnt get a straight answer from others . i have a 95 ts exc, standard as you can find.i picked up a ks verada for 500 i was wanting to know if i was going to put the power windows, abs, climate control, middle clock and driving lights and etacs if it still works on mine would it be worth it and if possible to replace the whole loom from the fuse box next to the battery to inside and across instead of tryin to deal with my stock loom and add stuff on . my question is does the ks loom have all the extra wires i need to make it to the inside fusebox. cause ive read that the power windows can be difficult to wire up.

They dont have foglights....
I would spend a few days and transfer the whole loom over, This is what I'll be doing myself.

I echo Tuffy. Change the whole loom it is easier in the end. I have done this conversion the hard way because in my donor rada the harness had been butchered by the previous owner. Note in your profile yours is a 4cyl auto. Not sure if you will be able to change complete harness unless you are planning to convert to V6. You may have to take both harnesses out and make one out of two as some components are shared.

Follow this link and download the workshop manual you will find it essential. http://www.aussiemagna.com/forums/showthread.php?t=56815

yea didnt think about it hooking up to the engine with dif sensors, ill have to pull it apart then and keep the efi seperate as much as i can thanks for that phonetech