Hey guys..


This is ne for those TE - TF owners. Just wanna know if any of you guys have fitted a TJ Auto Transmission to your TE or TF. What problems did you have and do they fit. Also what was needed for the job.? Just the box or Computer too.? I would even like to here if you dont own one put can enlighten me a little.:)

Thanks.



All The Breast
Jason :)

Can't imagine it would be an issue Jase. Actually, with a big enough hammer, nothing is an issue. You looking at 5spd in an early 3rd gen?

Lukes TE shat a trans last nite. Goes into gear but wont move. Something inside is wrong. Was expecting to let go sooner or later. Have been talking about trowing a 5sp TJ trans in it but wasnt sure if it will work.?

Manual conversion time for Luke then?

Shut up fool.


Who pulled your cord anyway..??

i have a spare 4 spd tranny. that would bolt up with no mods, never had a problem with it

When I was looking at this from the information I could gather you need the gearbox (obviously) ECU, harness and Shifter box. Things like the 5sp cluster obviously aren't required but would probably be useful in which case you'd need the dash loom too I'd image.

When I was looking at this from the information I could gather you need the gearbox (obviously) ECU, harness and Shifter box. Things like the 5sp cluster obviously aren't required but would probably be useful in which case you'd need the dash loom too I'd image.

Standard 4sp tippy box is the same box as the non tippy, it is the TCU and the shifter that make the difference.

There is at least one member in Vic who has placed a 3.5 trans into the 3.0, was a few months ago and he posted in an old forsale thread of mine, if you hunt down the FS thead where I was selling my engine and trans, he was in there somewhere