on the 94 model manga ts, there is a bit of damage to the front end,

i've pulled the radiator out and it looks fine, pulled the trans oil cooler out and its fine, what would be the 3rd radiator looking thing, (where all the damage is) would it be the A/c or what would it be?

on the 94 model manga ts, there is a bit of damage to the front end,

i've pulled the radiator out and it looks fine, pulled the trans oil cooler out and its fine, what would be the 3rd radiator looking thing, (where all the damage is) would it be the A/c or what would it be?

would be the AC condenser mate:)

thats what i was thinking it had to do with, >.< just another problem i have to deal with grrrrrr..... cause its gotta be taken out so i can repair the front end, (as the bonnet doesnt clip properly into the bracket if i dont repair it) and ofcause dont have the tools nor the money to get a mech out to repair it nor do i have the ability to take the car to get it repaired

just ruddy great >.<

i've just been quoted $593.40 for parts, labour and GST from lube mobile, so basicly im stuffed, why do pensioners always get stuffed (not the word im wanting to use) over

Try to get a non genuine core if you can....will be heaps cheaper.

i've just been quoted $593.40 for parts, labour and GST from lube mobile, so basicly im stuffed, why do pensioners always get stuffed (not the word im wanting to use) over

hi shadowrg
well depending on where you are located i could come help you out
my contact number is 0410999646 i am a mit's service tech me charge wont be as high as lube moile
cheers liam

well there was no gas to begin with, the fender bender that the previous owner had in it dented the main brace behind the grill and pushed it back onto the ac condenser and put a small hole in it, so taking the thing out isnt gonna be so much a hassle as i first thought, just putting in a different one is gonna be a small hassle... the 93 tr's condenser is different then the 94 ts's, so i'm either gonna have to go down the wreckers tomorrow or buy one brand new. (wreckers will be cheaper) then get someone to fill it back up once im finished with other things on the car. (drive shaft seals, interior)

other then that im in springvale, if your around the area i'll give ya a call and inlist your help for the drive shaft seal, i dun even want to turn the engine over just incase something goes wrong >.>

ok got the condenser from the wreckers for $38, going to be working on the car tomorrow, bang out the bent brace, and stick the condenser in. once the drive shaft seal is done (will be inlisting someones help) i'll be able to get the rwc test on it, see what else needs to be done and hopefully get the car on the road soon

a metal pipe is coming in very handy, helping me straighten out the brace, as its too bent to fit the straight condenser in, could really use a blow torch to heat the metal up so its easier to straighten, but oh well. i can say one thing, i win. my bonnet now clips on and stays down. tomorrow another day of bending metal lol