My flatmate is looking to buy a 380 and was wondering if the wheels on my KE will fit. Do the 380's have the same stud configuration as the TE/KE series?

Yep sure do.

When I traded my TE in on my 380 I swapped the wheels over with no problems.

But I suspect the offset is a little different so you may need to watch that, depending on the size of wheels you are talking about.

KJ.

yes they will fit no probs

yeah same stud pattern, from memory the offsett for a 380 is 48mm and 3rd gen is... 35 to 40 cant member what..
if they were stock wheels on ya KE would fit fine, although if aftermarket it depends on the offset and im not sure what kinda leway the offset has...
like im not sure if a 40mm offset would be okay on a 380 of which offset is 48.. if that makes sense?

will check and update but i think the 380 off set is 38? at uni atm will let you know when i get home.
and on top of that i think there might be a bit of change in relation to the stock tyre inclusive circumference, one of the wheel specialists would be able to help you with that however. all you'd need would be different tyres.

Yep sure do.

When I traded my TE in on my 380 I swapped the wheels over with no problems.

But I suspect the offset is a little different so you may need to watch that, depending on the size of wheels you are talking about.

KJ.

The wheels on mine are 235/40/18. I'd assume the rolling diameter would be the same as the 380 Might go and talk to a tyre shop just to make sure.

The wheels on mine are 235/40/18. I'd assume the rolling diameter would be the same as the 380 Might go and talk to a tyre shop just to make sure.

Go to 1010tires.com and use their tyre calculator!

Cheers guys. Checked the difference between the stock wheels and mine and there is less than 1% difference.

46mm offset I think you will find

yeah same stud pattern, from memory the offsett for a 380 is 48mm and 3rd gen is... 35 to 40 cant member what..35 to 40 is for 7.5-8.5" wide rims on 3rd gens. Stock is 46, same as the 380 stock.