So,im wanting to install L.E.D lights in my indicators,and i know im going to need an electronic flasher can,as i have already tried a globe and it flashers like crazy and the globe doesn't work..and..yes ...i know why,so,

Where on the 380 is the flasher can ???

Have tried putting the indicators on and listening for it. Things have more than likely changed since i have stuffed around with my last can but that is what I used to do.

hey mike the 380 doesnt use a flasher can its all part of a module. the module is located on the back of the fuse box inside. the module also does interior lights etc. what you need to do is wire up some resistors in paralell with the indicators.

okay...well it looks like you are going to have to help me wire it up then,doesnt it....lol...

make sure you get PICS and do a DIY PLEASE

yeah DIY it up, you'll be very popular :)

This could be one solution to fix the "problem" (http://cgi.ebay.com.au/2pcs-6-Ohm-50W-Turn-Signal-LED-Bulbs-Load-Resistors_W0QQitemZ190360661808QQcmdZViewItemQQptZ AU_Car_Parts_Accessories?hash=item2c52612f30) of non working led in the flasher system........pretty self explainatry

you will have to measure the impedance on both the incandescent bulb and the led to work out what resistor you will need. Have a chat to your local auto electrician as there may be a quick fix solution available. or not but it wont hurt and they should know.

you will have to measure the impedance on both the incandescent bulb and the led to work out what resistor you will need. Have a chat to your local auto electrician as there may be a quick fix solution available. or not but it wont hurt and they should know.

what maggie has linked to is exactly the type of resistors we use at work.