Does anyone know the Length, type and grade of the bolts that hold the front lower control arm to the cross member?

3 shorter bolts for Rear Bracket
Dia.
Thread pitch.
Length.
Grade.

1 longer bolt and nut on inner control arm mount
Dia.
Thread pitch.
Length.
Grade.

Cheers,

:bump:
Surely someone has these lying around.

The front lower control arm bolt/nut details are:


Bolt head has a 10 on it
M12 x 1.25mm thread
Length overall including bolt head 125mm
Thread length 25mm


Cheers

Thanks Magna Diver.

Was under the KH this morning checking the D bushes on the front stabiliser bar so I took the 3 rear bracket bolts out for a looksee. The bolt details are:

All bolt heads have a 7 on them with 1 x raised point on each side of the 7
M12 x 1.25mm thread
Length overall including bolt head 32.65mm
Thread length is the length of the bolt

Cheers

Your a champ! Awesome.

Mate, personally i would not replace them with anything else, some go harder bolts which is a mistake as are brittle

The ones on your car should be fine, I am yet to see any of these damaged