hey guys ive done an abs/tcl conversion on my KR as some may know already but before i take it for engineers im just double checking everything and 1 think im not sure of yet is if i have the brake lines connected correctly

some may know the abs pump behind the passenger side headlight. I was wondering if someone could tell me which line goes to which port. I know there are 2 feeds from the BMC and there are 4 outlets at the pump, which makes a total of 6 ports on the abs pump.

If someone could take a pic and label them or just tell me left to right which is which. Im pretty confident the 2 feeds from the bms are the 2 middles ones of the front 4 and till now have assumed each port left identified each corner of the car. thanks in advance

Lionel

Haven't gone to look at my ABS V6 TS, but accorfing to the manual:
Port 1 = FL, front brake, LH
Port 2 = RR , Rear brake, RH.
Port 3 = FR, Front brake, RH
Port 4 = RL, Rear brake, LH
Port 5 = A, master cylinder, for left front and right rear
Port 6 = B, master cylinder, for right front and left rear.

I don't know if those labels are on the actual unit, but I will look-see.

NOPE, no labels, but 4 of them are in a semicircle, from the fender outwards they are 3,4, 2 and 1. The other 2, B is closest to the fender and A is further away.

Hope this helps.

Fig 48 on page 35-7-53 of the TR-TS-KR-KS workshop manual if you want to have a look.

i looked all through that manual thanks for finding it for me i must have missed it like 10 times

i had a couple mixed up but all good now, thanks a bunch

The harder you look, the more the information hides . . . . Murphy's law I guess.