well, ive tryed searching and not much came up, i wondering if there is a write up on how to remove my inner door trim to attain access to my front speakers and re-upholster, my door cards?
i know where the three screws are, just i am stuck after that, and my door has electric windows if that helps,
please help.

98 tf magna altera........

mainly held on by clips.... just pull off u will need some force to do it. just make sure u get all the screws first including behind the door handle.
http://i807.photobucket.com/albums/yy351/gtrtwinturbo/Untitled.jpg

mainly held on by clips.... just pull off u will need some force to do it. just make sure u get all the screws first including behind the door handle.


what about the door handle (the opening lever) does that come off in one piece? or am i missing something?

u should only need to remove the backing piece (1) in the pic and then the other couple screws and (its easier with the window down) just pull off the card and lift up kinda at the same time. im not sure what the go is with the electrics though as my car is manual windows.

u should only need to remove the backing piece (1) in the pic and then the other couple screws and (its easier with the window down) just pull off the card and lift up kinda at the same time. im not sure what the go is with the electrics though as my car is manual windows.

yeah its that backing piece that i am stuck on...does it just pull off,or is their a method to it?

as far as your lecky windows go....get something to lift the swith up to unclip the loom..will be easier to do when the trim is still on rather than trying to unclip the loom,and dont forget to unhook the courtesey light....

yeah its that backing piece that i am stuck on...does it just pull off,or is their a method to it?

Yeah, if you lift the handle, and then pull it should dislodge and come out.

yeah its that backing piece that i am stuck on...does it just pull off,or is their a method to it?

you need to hold the handle in the open posi to allow the backing bit to slide off/forward

as far as your lecky windows go....get something to lift the swith up to unclip the loom..will be easier to do when the trim is still on rather than trying to unclip the loom,and dont forget to unhook the courtesey light....

sorry if i am sounding daft, but what do you mean by lift the switch up to unclip the loom.

sorry if i am sounding daft, but what do you mean by lift the switch up to unclip the loom.

Lift the handle up. You should be able to dislodge the backing then. and slide it over the handle and off.

sorry if i am sounding daft, but what do you mean by lift the switch up to unclip the loom.

the whole panel clips in and lifts out...get a screwdriver or your fingers....its easier to do ,but you can unclip the loom off the switch once the trim is off if you want

lift and hold (7) up and disconnect the switches from the main door loom.

Lift the handle up. You should be able to dislodge the backing then. and slide it over the handle and off.

yeah i got that bit, i thought he was refering to the electrical side of things, ie the electric window pad...

cheers guys i understand now.... will give it a go at first light..

yeah i got that bit, i thought he was refering to the electrical side of things, ie the electric window pad...

haha i re-read after and was like....*faceplam* i look like an idiot now.