how iss the centre console on a tl magna VRX attached, and how to remove and reinstall‏?

Panda Tr's DAD haha

this should do the job...


Easy Peasy, Ease (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0224.jpg) out the gear surround ( includes P/W controls and Cup holders), Prying (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0225.jpg) upwards all around and it comes off, the very front is the only bit that doesnt unclip. that slots in at the front, Disconnect (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0226.jpg) the Power window connection plug,
Apply hand brake, Chock if not on level ground, Place car in neutral and pull surround sliding to the rear of the car.
This is the hardest bit, removing the compartment above where the cup holders were. With the lid open place palms facing upwards Gripping (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0227.jpg) as well as you can manage (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0228.jpg) with both hands ( dont grab the door) and pull to rear of the car. This exposes (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0229.jpg) two screws to remove and the last panel prys (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0231.jpg) off. Disconnect (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0232.jpg) aircon controls, hazard lights and air temp sensor. And the bracket holding in the stereo is right before you, take (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0232-1.jpg) care with the top screws, they require a metal clip to secure themselves and are like ly to jump off when reattaching. Tape them in place.....

cheers mate

In regards to the power windows wiring - is there a clip on the wiring plug in to the base of the white attachment immediately under the switches - there seems to be a tag on the fwd part of the plug that needs pushing in
any more detail you can give would be great

More help really needed plz

In regards to the power windows wiring - is there a clip on the wiring plug in to the base of the white attachment immediately under the switches - there seems to be a tag on the fwd part of the plug that needs pushing in
any more detail you can give would be great


Just about all of the electrical connectors have a lock tab of sorts.
The front of the p/windows, underneath the A/C controls, and to the side of the Hazards lights.
The power windows are the first, there is a tab that needs to be depreesed so you can remove the wiring plug. Take a look how they work, the rest are very similar.

Easy Peasy, Ease (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0224.jpg) out the gear surround ( includes P/W controls and Cup holders), Prying (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0225.jpg) upwards all around and it comes off, the very front is the only bit that doesnt unclip. that slots in at the front, Disconnect (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0226.jpg) the Power window connection plug,
Apply hand brake, Chock if not on level ground, Place car in neutral and pull surround sliding to the rear of the car.
This is the hardest bit, removing the compartment above where the cup holders were. With the lid open place palms facing upwards Gripping (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0227.jpg) as well as you can manage (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0228.jpg) with both hands ( dont grab the door) and pull to rear of the car. This exposes (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0229.jpg) two screws to remove and the last panel prys (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0231.jpg) off. Disconnect (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0232.jpg) aircon controls, hazard lights and air temp sensor. And the bracket holding in the stereo is right before you, take (http://i228.photobucket.com/albums/ee217/SH00T/IMG_0232-1.jpg) care with the top screws, they require a metal clip to secure themselves and are likely to jump off when reattaching. Tape them in place.....

Fixed

thanks